How to replace Clutch and Flywheel on a 997.1 C4S/C2S
#1
Pro
Thread Starter
How to replace Clutch and Flywheel on a 997.1 C4S/C2S
Folks,
After reading Rotmilky tutorial on how to change the clutch and being in the need to replace the clutch on my 2006 C4S, I decided to jump in this adventure with both feet and published a tutorial to help our small Porsche community.
Below is the link to the tutorial:
http://murenae.com/FTP_Files/997_Clutch_Work.pdf
Although this is not an easy task, it can be done with some help and access to a few tools. My admiration goes to Rotmilky for doing this in his garage and by himself.
Enjoy and be safe.
Yves
After reading Rotmilky tutorial on how to change the clutch and being in the need to replace the clutch on my 2006 C4S, I decided to jump in this adventure with both feet and published a tutorial to help our small Porsche community.
Below is the link to the tutorial:
http://murenae.com/FTP_Files/997_Clutch_Work.pdf
Although this is not an easy task, it can be done with some help and access to a few tools. My admiration goes to Rotmilky for doing this in his garage and by himself.
Enjoy and be safe.
Yves
#2
Link isn't working
Folks,
After reading Rotmilky tutorial on how to change the clutch and being in the need to replace the clutch on my 2006 C4S, I decided to jump in this adventure with both feet and published a tutorial to help our small Porsche community.
Below is the link to the tutorial:
http://murenae.com/FTP_Files/997_Clutch_Work.pdf
Although this is not an easy task, it can be done with some help and access to a few tools. My admiration goes to Rotmilky for doing this in his garage and by himself.
Enjoy and be safe.
Yves
After reading Rotmilky tutorial on how to change the clutch and being in the need to replace the clutch on my 2006 C4S, I decided to jump in this adventure with both feet and published a tutorial to help our small Porsche community.
Below is the link to the tutorial:
http://murenae.com/FTP_Files/997_Clutch_Work.pdf
Although this is not an easy task, it can be done with some help and access to a few tools. My admiration goes to Rotmilky for doing this in his garage and by himself.
Enjoy and be safe.
Yves
Thanks!