The Diary of a 2011 Carrara White 997.2 C2 PDK by ElectricChair
The following users liked this post:
ElectricChair (07-27-2020)
#242
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Looking superb as always EC
__________________
Visit us online https://emc2design.com
By Porsche enthusiasts
Visit us online https://emc2design.com
By Porsche enthusiasts
For Porsche enthusiasts
The following users liked this post:
ElectricChair (07-28-2020)
#243
The transformation from stock to the Eibach and spacers is incredible. Your car looks great and hats off for meticulously maintaining it. I just got into a 997.1S and put some Eibach springs on it as well and it looks incredible. I always hear about springs "settling" after some time, but don't know if there is anything to that. Did you find that to be the case or are they sitting at the same height from your initial measurements?
Here she is all polished up. Waiting on some 5mm spacers to complete the look! These Sport wheels are 8.5" and 11.5' wide so didn't want to go with too much spacer.
Here she is all polished up. Waiting on some 5mm spacers to complete the look! These Sport wheels are 8.5" and 11.5' wide so didn't want to go with too much spacer.
The following 3 users liked this post by FNavarro:
The following users liked this post:
EMC2 (11-13-2021)
#247
Rennlist Member
The following users liked this post:
ThomasCarreraGTS (11-14-2021)
#249
Rennlist Member
Thread Starter
Gave her some extra attention this weekend.
My steps to wax:
1) Wash and dry.
2) Apply paintwork cleanser and buff off.
3) Apply carnauba wax and let it sit overnight.
4) Buff off the dried wax.
My steps to wax:
1) Wash and dry.
2) Apply paintwork cleanser and buff off.
3) Apply carnauba wax and let it sit overnight.
4) Buff off the dried wax.
Last edited by ElectricChair; 12-06-2021 at 09:10 PM.
The following users liked this post:
Emc2design (04-16-2023)
#250
Rennlist Member
Thread Starter
Today I replaced the worn frunk struts with a set of Stabilus SG406031. After playing around with some flat head screwdrivers I just figured out that a staple remover works best to pop out the small clips.
Big thanks to @Bruce In Philly for posting the replacement parts and link to amazon. Here is his thread:
https://rennlist.com/forums/997-foru...ispreloading=1
Big thanks to @Bruce In Philly for posting the replacement parts and link to amazon. Here is his thread:
https://rennlist.com/forums/997-foru...ispreloading=1
Last edited by ElectricChair; 03-29-2022 at 08:56 PM.
The following users liked this post:
Emc2design (04-16-2023)
#252
Rennlist Member
Thread Starter
I just took photos of the frunk to compare. There is a small plastic box inside the compartment. I have no idea what is it. The box is attached to the frunk and it has a few wires running in/out.
The following users liked this post:
myw (04-07-2022)
The following 2 users liked this post by ElectricChair:
Emc2design (06-15-2022),
Graufuchs (02-02-2023)
The following 3 users liked this post by ElectricChair:
The following 2 users liked this post by ElectricChair:
eggsandwich (04-22-2023),
Porsche SG (04-23-2023)