Review: 997.2 TechArt Springs, GT3 + TPC Sway Bar Install
#31
Burning Brakes
Thread Starter
#32
Three Wheelin'
What a perfect post - thanks so much for your diligence and documentation. You car - cars - and garage! - look fantastic.
I've just put Sport Classic wheels on my car and they look great, but exacerbate the ride high problem to the point that it is bothering me enough to deal with it.
And lucky me - I'm in ATL, so I know right where to go to get things done!
I've just put Sport Classic wheels on my car and they look great, but exacerbate the ride high problem to the point that it is bothering me enough to deal with it.
And lucky me - I'm in ATL, so I know right where to go to get things done!
#33
I've enjoyed the posts about lowering the 997 with the Techart Springs.
I have a 997.2 with PASM, and Sport Chassis.
My car is only 10 MM higher, than the lowered example.
Though I would prefer a lower Centre of Gravity, CG, this is close enough.
I have the wonderful DSL module from TPC Racing, and it is a big improvement in planting the car.
You mentioned that you would never track your car.
I highly suggest you reconsider, and try this activity!
Once one learns how to really drive a 911, the mere act of posturing seems ridiculous. If you have a PCA DE session available to you, you will be ecstatic after your first experience!
I have a 997.2 with PASM, and Sport Chassis.
My car is only 10 MM higher, than the lowered example.
Though I would prefer a lower Centre of Gravity, CG, this is close enough.
I have the wonderful DSL module from TPC Racing, and it is a big improvement in planting the car.
You mentioned that you would never track your car.
I highly suggest you reconsider, and try this activity!
Once one learns how to really drive a 911, the mere act of posturing seems ridiculous. If you have a PCA DE session available to you, you will be ecstatic after your first experience!
The following users liked this post:
P_911_Nutt (05-14-2022)
#34
Burning Brakes
Thread Starter
What a perfect post - thanks so much for your diligence and documentation. You car - cars - and garage! - look fantastic.
I've just put Sport Classic wheels on my car and they look great, but exacerbate the ride high problem to the point that it is bothering me enough to deal with it.
And lucky me - I'm in ATL, so I know right where to go to get things done!
I've just put Sport Classic wheels on my car and they look great, but exacerbate the ride high problem to the point that it is bothering me enough to deal with it.
And lucky me - I'm in ATL, so I know right where to go to get things done!
Sent you a PM.
#36
Burning Brakes
Thread Starter
#38
Burning Brakes
Thread Starter
#39
Rennlist Member
Literally a night and day difference IMO. At least for street driving. PSS is one of the sketchiest tires I've ever driven. I guess there are N rated PSS in Europe, would assume stiffer side wall. But the US version I have are coming off next week and putting on used PS2 until I can find something as Planted. I went from go kart like handling to extremely vague feel, drifting all over the lane at speed. Went from feeling safe and connected over 130 to puckering my *** at 110. Lot of people trying to fix PSS issues with tons of suspension mods. If you get a chance and can get a set somehow, try them out. Lots of people love PSS that don't drive aggressively... quieter, better cold grip, etc. Had I not had both back to back I would think I was crazy! :-D
#40
What should I do, install myself/ let a shop handle it? Having the exact same set up minus the sway bars, I'm now considering sway bars.
#41
Burning Brakes
Thread Starter
If you have a lift, it is very managable for an experienced DIY'er.
I consider myself to be in this category (e.g.: I did a suspension upgrade on my Cayenne), however I don't have a lift in my garage, so I had the shop do my 911.
The issue is that you need to get inside the vehicle to remove and install the rear suspemsion and I would never do that with the vehicle on jackstands.
#42
Man of Many Porsches
Rennlist Member
Rennlist Member
wow ! thanks! awesome write up, i know this thread is old but just bought another 911 .. a pdk 09 C2 so wifey can drive another pcar... same without pasm...thanks for the ROW part #s
Was only here for the suspension then I see the steering wheel dangit..have to change mine too now...haha!!.. enjoy the car looks great!!!
btw i dont really care about the sport/sport plus light in the steering i can install the newer wheel with paddle in my car right? paddles will work?
Was only here for the suspension then I see the steering wheel dangit..have to change mine too now...haha!!.. enjoy the car looks great!!!
btw i dont really care about the sport/sport plus light in the steering i can install the newer wheel with paddle in my car right? paddles will work?
#43
Racer
Cost?
If you have a lift, it is very managable for an experienced DIY'er.
I consider myself to be in this category (e.g.: I did a suspension upgrade on my Cayenne), however I don't have a lift in my garage, so I had the shop do my 911.
The issue is that you need to get inside the vehicle to remove and install the rear suspemsion and I would never do that with the vehicle on jackstands.
I consider myself to be in this category (e.g.: I did a suspension upgrade on my Cayenne), however I don't have a lift in my garage, so I had the shop do my 911.
The issue is that you need to get inside the vehicle to remove and install the rear suspemsion and I would never do that with the vehicle on jackstands.
Very informative, thanks for documenting.
#44
Rennlist Member
Traditional Eibach lowering springs for Porsche 9 series cars are progressive. They have tighter, firmer coils on one end and larger, softer coils on the other, so cornering gets firmer when the car is pushed. The TechArt by Eibach springs look linear, so I would expect drivers to get different feedback and a different feel.
Last edited by Darkhorse; 12-24-2020 at 06:12 PM. Reason: clarity