Notices
997 Forum 2005-2012
Sponsored by:
Sponsored by:

Coil-over install

Thread Tools
 
Search this Thread
 
Old 12-30-2014, 12:03 AM
  #1  
D.Kinsey
Advanced
Thread Starter
 
D.Kinsey's Avatar
 
Join Date: Jul 2010
Location: Santa Fe,TX.
Posts: 75
Likes: 0
Received 1 Like on 1 Post
Default Coil-over install

About what should I expect to pay for labor to install PSS10 w/PASM and swaybars and also 4 wheel align on a 2007 C2S? Thanks!
Old 12-30-2014, 10:04 PM
  #2  
D.Kinsey
Advanced
Thread Starter
 
D.Kinsey's Avatar
 
Join Date: Jul 2010
Location: Santa Fe,TX.
Posts: 75
Likes: 0
Received 1 Like on 1 Post
Default

Looks like I'll be the first..
Old 12-30-2014, 10:14 PM
  #3  
Slamuth
Racer
 
Slamuth's Avatar
 
Join Date: Dec 2011
Location: Dayton, OH
Posts: 312
Likes: 0
Received 0 Likes on 0 Posts
Default

Surely someone will chime in, just be patient...we're on a holiday delay.
Old 12-30-2014, 10:22 PM
  #4  
mk3boy
Racer
 
mk3boy's Avatar
 
Join Date: Mar 2014
Location: Montreal
Posts: 283
Received 9 Likes on 5 Posts
Default

i did them myself and its a few hours job if you have the right tools. Some people on the board have said 800-1000$
Old 12-31-2014, 12:08 AM
  #5  
Buddhamonk
Three Wheelin'
 
Buddhamonk's Avatar
 
Join Date: Feb 2013
Location: Portland OR
Posts: 1,251
Received 51 Likes on 30 Posts
Default

did it myself also. labor was free =)
Old 12-31-2014, 01:22 AM
  #6  
Comanche_699
Rennlist Member
 
Comanche_699's Avatar
 
Join Date: Sep 2013
Location: Santa Venetia, CA
Posts: 704
Received 5 Likes on 4 Posts
Default

I think it really depends where you live. I had a recent quote for PS10's with sways front and rear, corner balance & alignment & it was $5,000 including the parts.
Old 12-31-2014, 09:58 AM
  #7  
mk3boy
Racer
 
mk3boy's Avatar
 
Join Date: Mar 2014
Location: Montreal
Posts: 283
Received 9 Likes on 5 Posts
Default

just corner balancing and alignment is 800$ cdn. Install another 500-800+ parts. If you go low need toe end links on rear which is another 600$
Old 12-31-2014, 11:34 AM
  #8  
GermanCarSpecialists
Former Vendor
 
GermanCarSpecialists's Avatar
 
Join Date: Dec 2011
Location: San Antonio, TX
Posts: 788
Likes: 0
Received 1 Like on 1 Post
Default

$620.00 plus alignment $149.95 here. If there are additional hardware such as drop links, control arms etc. there might be minimal extra charge.
Old 12-31-2014, 08:59 PM
  #9  
mdrums
Race Director
 
mdrums's Avatar
 
Join Date: Mar 2006
Location: Tampa
Posts: 15,358
Received 180 Likes on 127 Posts
Default

I had Bilstein B16 Damptronics installed...I believe install was around $500 and alignment was $150. I had adjustable sways installed before the coilovers and the rears are easy to do but the front requires the entire front sub-frame to be loosened and slightly dropped. I don;t remember exactly what labor was for that but somewhere around $450 including an alignment.
Old 12-31-2014, 09:16 PM
  #10  
D.Kinsey
Advanced
Thread Starter
 
D.Kinsey's Avatar
 
Join Date: Jul 2010
Location: Santa Fe,TX.
Posts: 75
Likes: 0
Received 1 Like on 1 Post
Default

Thanks yall. Ended up paying 3200 to swap parts to new car and reinstall parts on old one and align both. Probably would have been about the same to have just left everything on the old car and bought new parts for the new one lol



Quick Reply: Coil-over install



All times are GMT -3. The time now is 07:25 PM.