2005 C2 - sat for 5 days... P0011 CEL... ungh
#1
2005 C2 - sat for 5 days... P0011 CEL... ungh
(2005 997.1 C2 6MT)
so I finally got the car out of the shop last thursday, then had family vacation sun-Thurs... got home tonight, fired up the car to go get some Chinese food...
boom, P0011 CEL/"visit workshop"
cam over-advance or system performance, bank 1.... same bank that got a new cam sensor a week ago...
drives fine, feels snappy, no odd vibrations or imbalances...
shut-off and re-started twice on the way home (food, fuel)...
seriously contemplating clearing the code and driving it to Denver tomorrow (as planned) since I'm more likely to find a good shop out there to fix it anyway!
so I finally got the car out of the shop last thursday, then had family vacation sun-Thurs... got home tonight, fired up the car to go get some Chinese food...
boom, P0011 CEL/"visit workshop"
cam over-advance or system performance, bank 1.... same bank that got a new cam sensor a week ago...
drives fine, feels snappy, no odd vibrations or imbalances...
shut-off and re-started twice on the way home (food, fuel)...
seriously contemplating clearing the code and driving it to Denver tomorrow (as planned) since I'm more likely to find a good shop out there to fix it anyway!
#2
I had a similar code thrown, P0016, and it was a faulty variocam solenoid in bank 1. I cleared it several times and it always came back as a different code in that code "range". Think I got your code aswell. Hope that helps!
Last edited by millertimefl; 07-25-2014 at 12:05 AM. Reason: spelling
#3
I cleared the CEL and it hasn't come back yet... after 5 restarts and 50 miles or so. I wish I had a better understanding of the vario-cam mechanism (in BMW world this is a VANOS failure and you can live with it almost indefinitely, annoying, but won't damage anything until you have time to swap the unit).