Show me your 997 with non-Porsche wheels
#1216
The wheel specs are:
19x8.5 +36 O-Disk on 235/35/R19
19x11 +42 O-Disk on 305/30/R19
Some notes if you want to run the exact same fitment on a narrow body 911
1) I'd probably opt for 295 width rears. I've rolled my fenders and the rear bumper still rubs a little bit on the 305's...I'll have to shave it a bit
2) These BARELY clear the front calipers (maybe 1-2mm clearance) so if you're running PCCB or plan on a brake upgrade, these wheels will not fit.
3) Don't be surprised if you have to run a bit more rear camber
Appreciate the kind words!
19x8.5 +36 O-Disk on 235/35/R19
19x11 +42 O-Disk on 305/30/R19
Some notes if you want to run the exact same fitment on a narrow body 911
1) I'd probably opt for 295 width rears. I've rolled my fenders and the rear bumper still rubs a little bit on the 305's...I'll have to shave it a bit
2) These BARELY clear the front calipers (maybe 1-2mm clearance) so if you're running PCCB or plan on a brake upgrade, these wheels will not fit.
3) Don't be surprised if you have to run a bit more rear camber
Appreciate the kind words!
The following 4 users liked this post by Mayall911:
The following 7 users liked this post by monochrom3:
Bwoy1981 (02-17-2022),
Elliotw44 (02-18-2022),
Mayall911 (02-12-2022),
misterdega (03-07-2022),
Presto (02-13-2022),
and 2 others liked this post.
The following 3 users liked this post by pmunyan:
The following 5 users liked this post by RDS928S:
997Troy (11-18-2022),
Fined (02-17-2022),
greasem0nkey86 (09-06-2022),
RockyTop (02-17-2022),
steveP911 (02-16-2022)
#1222
Rennlist Member
The following 5 users liked this post by NSXavier:
Busta Rib (03-08-2022),
flapjacksteve (03-08-2022),
Mayall911 (02-17-2022),
misterdega (03-08-2022),
S85beast (05-03-2022)
#1223
Racer
@westerling They would look great on Arctic Silver. They've been great, no complaints at all! Always get compliments on them.
Last edited by Bwoy1981; 02-18-2022 at 01:01 PM.
#1224
Rennlist Member
Some better pics, Avant Garde M510
19x8.5 et45
19x11 et52
Heavy but a nice simple design. Rear offset is perfect.
19x8.5 et45
19x11 et52
Heavy but a nice simple design. Rear offset is perfect.
#1226
Rennlist Member
Apex SM-10 18"
Just got these on a couple days ago. Apex SM-10 flow-formed wheels. 18". 9" front (ET46) and 11" rear (ET60). Conti ExtremeContactForce 245/35 & 315/30. Going from 19" to 18" with the same aspect ratios opened up 1/2" more gap with the fender. But I'm also 1/2" lower in ride height.
#1227
Work Meister S1 3 Piece
#1229
Just got these on a couple days ago. Apex SM-10 flow-formed wheels. 18". 9" front (ET46) and 11" rear (ET60). Conti ExtremeContactForce 245/35 & 315/30. Going from 19" to 18" with the same aspect ratios opened up 1/2" more gap with the fender. But I'm also 1/2" lower in ride height.
The following users liked this post:
steveP911 (03-08-2022)
#1230
Rennlist Member
following in your footsteps about 7 years later! Love the look of these Forgeline GA1R wheels, perfect replacement for our CL wide body GTS’s.
Alex from Sharkwerks gave me a custom offset to account for my TechArt lowering springs (not installed yet) which were also custom spec’d for a 4GTS Cabrio weight, so I don’t get too much drop. Keeping my fingers crossed!
F: 8.5x19 et50
R: 11.5x19 et45
Alex from Sharkwerks gave me a custom offset to account for my TechArt lowering springs (not installed yet) which were also custom spec’d for a 4GTS Cabrio weight, so I don’t get too much drop. Keeping my fingers crossed!
F: 8.5x19 et50
R: 11.5x19 et45
Great choice of wheels!
Do you mind sharing the wheel cost? Through Sharkwerks or someone else?
Thanks!