Lets see your 997...
The following 5 users liked this post by SSMOKE-U:
elwademd (09-12-2023),
Graufuchs (09-11-2023),
mooch299 (10-04-2023),
nwGTS (09-11-2023),
Ohio Performance (09-11-2023)
#7322
Welp, may as well start my first direct contribution to the thread by being a little classy.
Was thinking of getting the classic "OMGBEKY" vanity plate but my wife is adamantly against it. She barely let me get away with a second 911 so maybe I won't push it this time.
Was thinking of getting the classic "OMGBEKY" vanity plate but my wife is adamantly against it. She barely let me get away with a second 911 so maybe I won't push it this time.
The following 3 users liked this post by jalvani:
#7323
I installed the smile vent myself. I bought a kit with the template for the hole so that was easy. But I’m not a fan of the mounting brackets. If you tighten them down to pull the vent flush with the bumper they kind of deform the bumper. I ended up gluing mine so it’s tight.
The following users liked this post:
SSMOKE-U (09-12-2023)
The following 11 users liked this post by Rougarou:
B911L (09-24-2023),
Carrera2RS (09-17-2023),
Dubber (09-14-2023),
elwademd (09-14-2023),
Fined (09-13-2023),
and 6 others liked this post.
The following 9 users liked this post by Mr. Tasty:
Bwoy1981 (09-14-2023),
Dubber (09-14-2023),
ElectricChair (09-14-2023),
elwademd (09-14-2023),
EVOMMM (09-13-2023),
and 4 others liked this post.
The following 4 users liked this post by GT3twenty10:
The following users liked this post:
elwademd (09-18-2023)
The following 12 users liked this post by Busta Rib:
B911L (09-24-2023),
booch (09-19-2023),
Carrera2RS (09-17-2023),
Dubber (09-18-2023),
elwademd (09-18-2023),
and 7 others liked this post.
The following users liked this post:
ftc3 (10-21-2023)
The following 3 users liked this post by Orange Leader:
The following 2 users liked this post by C4S_suarez:
elwademd (09-26-2023),
ParkslopeDope (10-03-2023)