Question for the Raleigh, NC guys
#1
Drifting
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Anybody in the Raleigh, NC area know of a good paintless dent removal guy?
Two inch-long dents magically appeared on the passenger side door today.
It's been a crappy F'ing week.
Two inch-long dents magically appeared on the passenger side door today.
It's been a crappy F'ing week.
#2
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
National Dent Works on Capital, he does great work, taken my 525i wagon there a few times.
#3
Drifting
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thanks for the quick response!
Anybody in particular that I should ask for and/or do you want me to tell them that you sent me?
I'll take Capital in to work tomorrow morning and swing by on the way.
Anybody in particular that I should ask for and/or do you want me to tell them that you sent me?
I'll take Capital in to work tomorrow morning and swing by on the way.
#4
Drifting
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
If that guy doesn't work or you want to try someone else, I'd call Leith and ask them who they use.
I'm in Cary and used some Russian fellows on Maynard that did a great job on my 964 way back when.
I'm in Cary and used some Russian fellows on Maynard that did a great job on my 964 way back when.
#5
Drifting
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Guys,
I dropped by John's shop on Capital Boulevard at about 9 this morning. He was super nice and quoted $129 for both dents (one was 1.5" and one was 1", both right in the middle of the door panel). I asked him when he could get to them and he said "right now, if you want".
Within 45 minutes I was on the road with absolutely no sign of the dents. He said he worked them out from inside using two access holes in the bottom of the door.
He's been doing this for many years and has had his own shop at this site for about ten years.
I couldn't be happier.
Thanks for the recommendation Bruce, and if anyone in the area needs paintless dent removal, go see John at National Dent Works.
I dropped by John's shop on Capital Boulevard at about 9 this morning. He was super nice and quoted $129 for both dents (one was 1.5" and one was 1", both right in the middle of the door panel). I asked him when he could get to them and he said "right now, if you want".
Within 45 minutes I was on the road with absolutely no sign of the dents. He said he worked them out from inside using two access holes in the bottom of the door.
He's been doing this for many years and has had his own shop at this site for about ten years.
I couldn't be happier.
Thanks for the recommendation Bruce, and if anyone in the area needs paintless dent removal, go see John at National Dent Works.
#6
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Guys,
I dropped by John's shop on Capital Boulevard at about 9 this morning. He was super nice and quoted $129 for both dents (one was 1.5" and one was 1", both right in the middle of the door panel). I asked him when he could get to them and he said "right now, if you want".
Within 45 minutes I was on the road with absolutely no sign of the dents. He said he worked them out from inside using two access holes in the bottom of the door.
He's been doing this for many years and has had his own shop at this site for about ten years.
I couldn't be happier.
Thanks for the recommendation Bruce, and if anyone in the area needs paintless dent removal, go see John at National Dent Works.
I dropped by John's shop on Capital Boulevard at about 9 this morning. He was super nice and quoted $129 for both dents (one was 1.5" and one was 1", both right in the middle of the door panel). I asked him when he could get to them and he said "right now, if you want".
Within 45 minutes I was on the road with absolutely no sign of the dents. He said he worked them out from inside using two access holes in the bottom of the door.
He's been doing this for many years and has had his own shop at this site for about ten years.
I couldn't be happier.
Thanks for the recommendation Bruce, and if anyone in the area needs paintless dent removal, go see John at National Dent Works.