How the f$&k do you turn up the nav volume in PCM 3.0?
04-15-2013, 03:57 PM
Instructor
Thread Starter
Join Date: Jun 2004
Posts: 131
Likes: 0
How the f$&k do you turn up the nav volume in PCM 3.0?
Please help, pulled over to post this. Got PCM 3.0 manual but cannot figure out for the life of me how to turn up nav volume. It's solo low can barely hear it. Tried the obvious, using left volume **** when voice is on but only increases radio. There has to be a way to do it. Thanks!!
PS: Rennlist search function is dead
Last edited by JasonNY; 04-15-2013 at 04:30 PM.
04-15-2013, 04:35 PM
Rennlist Member
Join Date: Apr 2005
Location: Orange County, Ca.
Posts: 624
When the nav voice comes on, turn the volume ****. The **** controls both, but only the one that you can hear at the time.....GR
04-15-2013, 04:36 PM
Pro
Join Date: Jun 2010
Location: Placentia, Ca
Posts: 605
Likes: 0
On my Audi when the voice comes up for the NAV I then turn up the volume and it goes up. It's not easy an can get irritating!
04-15-2013, 04:42 PM
Race Director
Join Date: Jun 2001
Location: North Bay Area, CA
Posts: 11,969
Press the Navi button, then press the Options button, then choose Set Navi from the menu. You'll then see an item to "Set Guidance Level".
04-15-2013, 05:36 PM
Instructor
Thread Starter
Join Date: Jun 2004
Posts: 131
Likes: 0
Thanks Mike! Was driving me mad. Couldn't hear the nav lady at all with the top down and needed directions.
04-15-2013, 06:11 PM
Race Director
Join Date: Jun 2001
Location: North Bay Area, CA
Posts: 11,969
No problem. Hope you made it to where you wanted to go.
04-15-2013, 06:13 PM
Instructor
Thread Starter
Join Date: Jun 2004
Posts: 131
Likes: 0
I got there, swearing at the poor little nav lady
