Insomnic

I realize this has been discussed ad nauseum and I have already read the Renntech DIY along with the shop manual; what I haven't seen is a solidified answer as to whether the fill plug is the front-most plug or the one toward the rear. Historically whenever I've changed MT fluids the higher plug has been the fill, with the slightly lower plug being the check, but I'm not sure on this one. I saw it discussed in this thread, but wanted to make sure that I have it right before I start adding fluid.


Fill Plug: Blue or Green?

Thanks in advance for any assistance!

vladeden

It is the green one.
I cleaned out and used my Motive power bleeder pump. It worked out great.

mdr2001

Seems like a great opportunity to get added to USMC_DS1 DIY and Tech Index thread

Would love to hear how it goes.

USMC_DS1

Would be great to see this one on the sticky.

Insomnic

Thanks for the follow-up, I figured it was the green one (by evidence of the missing fill plug.) I have no problem writing this one up, especially considering I wrote the last two DIY articles on the sticky. I have two our three more queued up for authoring including rotors and pads which will be added shortly.