Accent Your 997 With A Little Carbon Fiber
10-19-2010, 11:46 PM
#1
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Accent Your 997 With A Little Carbon Fiber
We just released a new carbon fiber vinyl. Its great for hiding rock chips and is a nice styling option.
You can read more here.
http://www.xpel.com/products/carbon_film.asp
You can read more here.
http://www.xpel.com/products/carbon_film.asp
__________________
XPEL Inc.
Support@XPEL.com Phone: (210) 678-3700
XPEL.com "Like" us on Facebook Follow us on Instagram
XPEL Inc.
Support@XPEL.com Phone: (210) 678-3700
XPEL.com "Like" us on Facebook Follow us on Instagram
10-20-2010, 11:06 AM
#3
Thanks....
If your advertising here you must be a sponsor who pays $ to keep this board up and running... Thank you
Looks like a neat product and can see where it will have its place.... is it simple adhesion applies or any heat to shrink to form? can it be re-used? Could see some cool applications for track use over head lights rather then blue tape etc...Thanks for letting us know this exist.
pay no attention to the jackass's that try and bash your product...
Looks like a neat product and can see where it will have its place.... is it simple adhesion applies or any heat to shrink to form? can it be re-used? Could see some cool applications for track use over head lights rather then blue tape etc...Thanks for letting us know this exist.
pay no attention to the jackass's that try and bash your product...
We just released a new carbon fiber vinyl. Its great for hiding rock chips and is a nice styling option.
You can read more here.
http://www.xpel.com/products/carbon_film.asp
You can read more here.
http://www.xpel.com/products/carbon_film.asp
10-20-2010, 11:57 AM
#4
If your advertising here you must be a sponsor who pays $ to keep this board up and running... Thank you
Looks like a neat product and can see where it will have its place.... is it simple adhesion applies or any heat to shrink to form? can it be re-used? Could see some cool applications for track use over head lights rather then blue tape etc...Thanks for letting us know this exist.
pay no attention to the jackass's that try and bash your product...
Looks like a neat product and can see where it will have its place.... is it simple adhesion applies or any heat to shrink to form? can it be re-used? Could see some cool applications for track use over head lights rather then blue tape etc...Thanks for letting us know this exist.
pay no attention to the jackass's that try and bash your product...
They ARE a site SPONSOR!
Check under the user ID, what does it say?
Are we turning this into another name calling thread again? Can I play?
Phil
10-20-2010, 12:03 PM
#5
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
If your advertising here you must be a sponsor who pays $ to keep this board up and running... Thank you
Looks like a neat product and can see where it will have its place.... is it simple adhesion applies or any heat to shrink to form? can it be re-used? Could see some cool applications for track use over head lights rather then blue tape etc...Thanks for letting us know this exist.
pay no attention to the jackass's that try and bash your product...
Looks like a neat product and can see where it will have its place.... is it simple adhesion applies or any heat to shrink to form? can it be re-used? Could see some cool applications for track use over head lights rather then blue tape etc...Thanks for letting us know this exist.
pay no attention to the jackass's that try and bash your product...
I could see it being reused a limited number of times if it is not left on too long (maybe a few hours), but no guarantees. Once the adhesive has crosslinked to the surface, you will ruin the film removing it. It is designed to be installed and left on.
10-20-2010, 12:11 PM
#6
Burning Brakes
Join Date: Nov 2002
Location: 40 min South from the 'Ring, 45 min East of Spa
Posts: 1,023
Likes: 0
Received 0 Likes
on
0 Posts
If your advertising here you must be a sponsor who pays $ to keep this board up and running... Thank you
Looks like a neat product and can see where it will have its place.... is it simple adhesion applies or any heat to shrink to form? can it be re-used? Could see some cool applications for track use over head lights rather then blue tape etc...Thanks for letting us know this exist.
pay no attention to the jackass's that try and bash your product...
Looks like a neat product and can see where it will have its place.... is it simple adhesion applies or any heat to shrink to form? can it be re-used? Could see some cool applications for track use over head lights rather then blue tape etc...Thanks for letting us know this exist.
pay no attention to the jackass's that try and bash your product...
10-20-2010, 12:15 PM
#7
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
I think Mickfluff was saying yes, we are a site sponsor therefore we can post here. I took it as him defending us....maybe I am reading it wrong though. Either way, it's all good guys. We are open to all opinions good or bad. 
Last edited by XPEL; 10-20-2010 at 12:15 PM. Reason: typo
Trending Topics
10-20-2010, 12:21 PM
#8
Instructor
Join Date: Jun 2009
Location: Philadelphia SW Suburbs
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
Of course, all opinions, good or bad, get you a bump to the top!
"Opinions are like *****s, everbody has one - AND THEY ALL STINK!"
10-20-2010, 12:36 PM
#9
????????
this board is getting outa hand....
Too many people looking for a lynching... take another read people.
I was basically reminding people sponsors keep the lights on.... provide options for our cars, although may not be for everyone should not get replied on with RUDE responses.
Nice product and thanks for posting.
Open to opinions good and bad is right on... but rude and disrespectful is what this board has started to become by many on how they post their views....
tetzlafh and rollingart may need to take another read at my post... tx
(Phil, little qick to pick a fight?, think you need a break)
Too many people looking for a lynching... take another read people.
I was basically reminding people sponsors keep the lights on.... provide options for our cars, although may not be for everyone should not get replied on with RUDE responses.
Nice product and thanks for posting.
Open to opinions good and bad is right on... but rude and disrespectful is what this board has started to become by many on how they post their views....
tetzlafh and rollingart may need to take another read at my post... tx
(Phil, little qick to pick a fight?, think you need a break
)
Last edited by mickfluff; 10-20-2010 at 01:03 PM.
10-20-2010, 01:50 PM
#10
Pro
Join Date: Jan 2006
Location: CO. USA.
Posts: 695
Likes: 0
Received 0 Likes
on
0 Posts
this board is getting outa hand....
Too many people looking for a lynching... take another read people.
I was basically reminding people sponsors keep the lights on.... provide options for our cars, although may not be for everyone should not get replied on with RUDE responses.
Nice product and thanks for posting.
Open to opinions good and bad is right on... but rude and disrespectful is what this board has started to become by many on how they post their views....
tetzlafh and rollingart may need to take another read at my post... tx
(Phil, little qick to pick a fight?, think you need a break)
Too many people looking for a lynching... take another read people.
I was basically reminding people sponsors keep the lights on.... provide options for our cars, although may not be for everyone should not get replied on with RUDE responses.
Nice product and thanks for posting.
Open to opinions good and bad is right on... but rude and disrespectful is what this board has started to become by many on how they post their views....
tetzlafh and rollingart may need to take another read at my post... tx
(Phil, little qick to pick a fight?, think you need a break
)Not to hijack this thread, back to "regular scheduled programming"
10-20-2010, 02:29 PM
#12
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
10-20-2010, 03:50 PM
#14
10-20-2010, 03:59 PM
#15
Three Wheelin'
