Remote battery tender hookup-another method
#1
Rennlist Member
Thread Starter
Remote battery tender hookup-another method
With my remote battery tender hookup I wanted easy access with the car cover on as well as a safe level of waterproofing. When not in use the plug is easily pushed into the bumper and out of the wind stream. The wire is directly connected to the battery and then ran through the inside of the bumper to the small cutout on the right bottom of the front bumper. (I ran the wire while the bumper was off and the Laser Interceptors were also being installed.) Pictures of the Cayenne Turbo S battery tender install below also.
Last edited by WaltB; 02-26-2010 at 12:40 PM. Reason: Added Cayenne