Replacing storage lid cover
#1
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Has anyone replaced the rear console storage lid cover in their 997? The 997's lid looks like it has a cover attached to it, unlike the 996's which is one-piece. If the cover can be easily removed without disassembling the actual lid from the hinge, then I'd like to replace it with a leather one from Suncoast:
http://www.e-partssales.com/miva/mer...ode=997Leather
The description says it's a direct replacement with no modifications, but I'd like to hear from those who've actually done this.
TIA
http://www.e-partssales.com/miva/mer...ode=997Leather
The description says it's a direct replacement with no modifications, but I'd like to hear from those who've actually done this.
TIA
#3
Drifting
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
It looks like the lid cover is held in place with 8 Torx screws that can be accessed by opening the console lid. See step 27 of the MAcarbon center console install instructions which can be found at a link here:
http://www.macarbon.com/store/997-ce...sole-area-155/
I'd give it a shot.
http://www.macarbon.com/store/997-ce...sole-area-155/
I'd give it a shot.
#5
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
It looks like the lid cover is held in place with 8 Torx screws that can be accessed by opening the console lid. See step 27 of the MAcarbon center console install instructions which can be found at a link here:
http://www.macarbon.com/store/997-ce...sole-area-155/
I'd give it a shot.
http://www.macarbon.com/store/997-ce...sole-area-155/
I'd give it a shot.
![thumbup](https://rennlist.com/forums/graemlins/thumbup.gif)