Under Body Pic's of 997 and front Drive Gear ?
#1
Under Body Pic's of 997 and front Drive Gear ?
I was at my dealership today and they are very tight on Warranty repair work,
I was wondering if someone could send me a pictures of the under body of 997.1 c4s Trip tonic as I was told I don't require the rear under cover with the Trip tonic and any idea of what a front Drive train would set you back?
Cheers
I was wondering if someone could send me a pictures of the under body of 997.1 c4s Trip tonic as I was told I don't require the rear under cover with the Trip tonic and any idea of what a front Drive train would set you back?
Cheers
#2
Poseur
Rennlist Member
Rennlist Member
I wouldn't want to buy one. (Another reason not to have a 4WD--more to go wrong have potentially have to replace someday).
Here's the normal Carrera S underneath.
Here's the normal Carrera S underneath.
#3
I'm assuming yours is a manual as it has the last tray?
Any one with pictures showing the front drive gear on a C4?
Trending Topics
#8
Poseur
Rennlist Member
Rennlist Member
The X51 headers were cleaned up considerably before I installed them. Getting non turbulant flow now through them. The sound is all that much better.
The skidplate is available from Performance Products, as I recall. Do a search on Rennlist for skid plate and Edgy01 (as author) and the stuff is there--sorry I don't have the link off hand) But read my early comments about how to mount it.
The skidplate is available from Performance Products, as I recall. Do a search on Rennlist for skid plate and Edgy01 (as author) and the stuff is there--sorry I don't have the link off hand) But read my early comments about how to mount it.
#9
The X51 headers were cleaned up considerably before I installed them. Getting non turbulant flow now through them. The sound is all that much better.
The skidplate is available from Performance Products, as I recall. Do a search on Rennlist for skid plate and Edgy01 (as author) and the stuff is there--sorry I don't have the link off hand) But read my early comments about how to mount it.
The skidplate is available from Performance Products, as I recall. Do a search on Rennlist for skid plate and Edgy01 (as author) and the stuff is there--sorry I don't have the link off hand) But read my early comments about how to mount it.
#10
Dave
#11
Poseur
Rennlist Member
Rennlist Member
I didn't add them for a performance gain. I did it because they appeared (to me) to be a better flow design. But that's just me. The older original S headers look fairly feeble.
#12
Rennlist Member
This is the bottom of my old C4S:
#13
Poseur
Rennlist Member
Rennlist Member
Dave--I thought they would be quite similar. Just an access hatch. A very neat photo! Did the roof dent in much when you put it on it's top to shoot that shot? Just some scratches?
#14
Rennlist Member
Ha ha. Actually, I had my wife take the picture from the road as I launched over a speed bump. This only works with Speed Yellow.
#15
Three Wheelin'
I found this that looks like Dan's, but says for Boxter:
http://www.automotion.com/product.as...dept%5Fid=4086
and for 997/others, which may be different than the photo for the actual 997 version...or not...?
http://www.automotion.com/product.as...dept%5Fid=4086
Looks like a good idea though as I already have a few scrapes like what can be seen on the screws on Dan's car where the blue bumper attaches to the black under-body.
This part is spec'd up to '08 though, so...?
http://www.automotion.com/product.as...dept%5Fid=4086
and for 997/others, which may be different than the photo for the actual 997 version...or not...?
http://www.automotion.com/product.as...dept%5Fid=4086
Looks like a good idea though as I already have a few scrapes like what can be seen on the screws on Dan's car where the blue bumper attaches to the black under-body.
This part is spec'd up to '08 though, so...?