997 Carrera lug nut removal
07-22-2018, 05:18 PM
#16
Wheel remvoval
Hello All, I had a blow out ( Driver's rear ) yesterday.
Now need to know what size torx wrench / bit fits these wheels.
2005 Carrera S w / 20 " wheels.
PS. Also need to decide to replace " in kind " or upgrade tires.
( Michelin 285 / 30 / 20 Pilot Super Sport )
Thanks
Now need to know what size torx wrench / bit fits these wheels.
2005 Carrera S w / 20 " wheels.
PS. Also need to decide to replace " in kind " or upgrade tires.
( Michelin 285 / 30 / 20 Pilot Super Sport )
Thanks
07-22-2018, 05:33 PM
#17
Three Wheelin'
Holy thread revival. The lug bolts are 19mm. They should not be a torx or reverse torx. If you are meaning the security lug bolt that is just a standard Porsche item that should be in the tool kit in the frunk.
Nice! you know, www.climarepair.com
07-22-2018, 08:13 PM
#23
Rennlist Member
For wheel hanger rods,
I bought 2 bolts , 4" long ( 14 x 1.5 mm ) at a local Mill supply store .
They cost $ 0.95 each .
Cut off the bolt heads with a hacksaw and wrap some electrical tape
over the shaft to prevent scratching the wheels .
Good enough for as often as I remove the wheels.
I bought 2 bolts , 4" long ( 14 x 1.5 mm ) at a local Mill supply store .
They cost $ 0.95 each .
Cut off the bolt heads with a hacksaw and wrap some electrical tape
over the shaft to prevent scratching the wheels .
Good enough for as often as I remove the wheels.
