metal 'clunk' at 2500 rpm
10-23-2021, 02:11 PM
#16
7th Gear
I have a similar metal clunk as discussed in this thread. Here a link to my video https://photos.app.goo.gl/MU2sgrzL4vn8stmm7
you can hear metal clunk in first 2 revs. Did anybody resolve this problem? I replaced motor mounts in April but the left side appears to be lower and I had to adjust the exhaust tip.
you can hear metal clunk in first 2 revs. Did anybody resolve this problem? I replaced motor mounts in April but the left side appears to be lower and I had to adjust the exhaust tip.
Last edited by MDZ87; 10-23-2021 at 03:03 PM.
10-23-2022, 08:11 AM
#17
Instructor
I have a similar metal clunk as discussed in this thread. Here a link to my video https://photos.app.goo.gl/MU2sgrzL4vn8stmm7
you can hear metal clunk in first 2 revs. Did anybody resolve this problem? I replaced motor mounts in April but the left side appears to be lower and I had to adjust the exhaust tip.
you can hear metal clunk in first 2 revs. Did anybody resolve this problem? I replaced motor mounts in April but the left side appears to be lower and I had to adjust the exhaust tip.
10-23-2022, 03:09 PM
#18
I have a similar metal clunk as discussed in this thread. Here a link to my video https://photos.app.goo.gl/MU2sgrzL4vn8stmm7
you can hear metal clunk in first 2 revs. Did anybody resolve this problem? I replaced motor mounts in April but the left side appears to be lower and I had to adjust the exhaust tip.
you can hear metal clunk in first 2 revs. Did anybody resolve this problem? I replaced motor mounts in April but the left side appears to be lower and I had to adjust the exhaust tip.
Adjusting exhaust tips to be equal height is a standard procedure and one of the reasons looking to see if they are low isn't a catch all for worn out mounts.
