Venture Shield clear Bra - how high
05-02-2006, 09:30 PM
#16
Rennlist Member
Originally Posted by Stephenkng
MHC2S, when you said the rear lower bumper portion, do you mean the area from the taillight down or the bottom 4" - 5" of the bumper???
05-02-2006, 09:32 PM
#17
Rennlist Member
Originally Posted by Deanski
Hey, tell Skip that he can meet his dark side family member my C2S black/black Aero etc. I too have the 3M film from Armorglove!
"Skip.... I'm your father!"
"Skip.... I'm your father!"
Very nice car Deanski.
05-02-2006, 09:34 PM
#18
Rennlist Member
Originally Posted by The B
If I had to do over: I would do the bottom of the back bumper (like in MHC2S's picture) and the inside lip area of the rear wheel well on the bottom few inches. Just a thought.
05-03-2006, 05:10 AM
#19
Advanced
Join Date: Jan 2006
Location: NY to CA
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Deanski, do you have issues with scraping the lower lip of the aero nose? I'm thinking about it, but don't think my driveway would allow it if it's more than 2"s lower than the standard bumper.
05-03-2006, 07:01 AM
#20
Three Wheelin'
Join Date: Dec 2005
Location: Norwalk,CT
Posts: 1,853
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mr997
Deanski, do you have issues with scraping the lower lip of the aero nose? I'm thinking about it, but don't think my driveway would allow it if it's more than 2"s lower than the standard bumper.
Where I DO get a scrape is from leaving a pitched driveway. I've had a few scrapes, but you could not tell unless you look under the cars nose.
As long as you go slow and don't tip the nose down with the brakes, you'll do fine. I thought I'd never clear the speed bumps at our condo, but I do.
You could try measuring a Aero nose from a level spot, then make a small plastic stick and transfer that to your car. Drive around and see the results.
Deanski
05-03-2006, 10:51 AM
#21
Banned
Originally Posted by Snoopy
I just heard this somewhere else as well. Does anyone have more info about this? OCBen?
https://rennlist.com/forums/showpost...06&postcount=7
05-03-2006, 11:42 AM
#22
Rennlist Member
Originally Posted by OCBen
Thanks for that link. Very interesting read. My thumbs up to 3M for making a great product
