Fabspeed X Pipe Install
#1
Fabspeed X Pipe Install
Finally, preparing to install a Fabspeed X-Pipe (not here yet). I remember some posts referring to new bolts/washer that is need. Anyone can let me know real quick what hardware I need to install. I rather use new hardware and quality materials if possible.
Thanks.
Thanks.
#2
Screws
20 PCS M8 x 25mm Flanged Hex Head Bolts Flange Hexagon Screws, Stainless Steel A2, DIN 6921 https://a.co/d/8en3NE9
Nuts
M8-1.25 Serrated Flange Hex Lock...
20 PCS M8 x 25mm Flanged Hex Head Bolts Flange Hexagon Screws, Stainless Steel A2, DIN 6921 https://a.co/d/8en3NE9
Nuts
M8-1.25 Serrated Flange Hex Lock...
The following users liked this post:
thunder911 (11-24-2023)
#3
Screws
20 PCS M8 x 25mm Flanged Hex Head Bolts Flange Hexagon Screws, Stainless Steel A2, DIN 6921 https://a.co/d/8en3NE9
Nuts
M8-1.25 Serrated Flange Hex Lock... https://www.amazon.com/dp/B083Y213KK...p_mob_ap_share
20 PCS M8 x 25mm Flanged Hex Head Bolts Flange Hexagon Screws, Stainless Steel A2, DIN 6921 https://a.co/d/8en3NE9
Nuts
M8-1.25 Serrated Flange Hex Lock... https://www.amazon.com/dp/B083Y213KK...p_mob_ap_share