I'm finally doing the Bilstein B12 install today. I have all the torques specs except for the shock and strut mount to dampener spec. Based on the info that came with the kit, I believe the front is 83ft/lb and the rear is 54ft/lb. Am I correct?

 

Or 34ft lb all around for the b12 kit. The chart appears to be labeled by kit model number at the top of each column.

 

Thanks. They are in and feel great. I knew the dampers were going but it's now obvious they were shot. She feels so much better and no more super rake toward the front. I'm putting some miles on her before getting an alignment on Thursday.