dgjks6

After 3 months got the car back and I took the bottom panels off and then drive to the dealer. I thought it would take me 10 minutes to put them back on. Well. I think it's an IQ test to figure out what panel goes where and in what order.

wndsnd

For re-install, start from front and work back. The rears are to be removed first for easy serviceing. So reverse order

Wayne Smith

If you're doing this on jack stands I don't envy you. Hopefully you have a lift. Beyond getting things aligned there are a lot of fasteners.

dgjks6

All done. Four post lift. Still was a pain because can't get a driver under some of the panels a s have to use a socket. No left over parts though.

Newt Gomez

Get some cinderblocks or something to set the car on and then you can have access to all corners. Stands or lift arms will get in the way unless you're super careful on placement.

Wayne Smith

No left over parts!!!! Take it apart and try again!!!!!

BLU997

I do my car belly panels up on wooden blocks, I also get motion sickness from diving under and climbing out from under the car too quickly, too many times. erk...