When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Oh that looks awesome. I would prefer hardware in black, though, that would be icing on the cake.
the 2 piece splitter comes in gel coat black with unpainted hardware. It's really meant to be painted, but the few of us with black cars can simply install it in 5 minutes and be done. They are Dsuz fasteners, could either be anodized, or a new set pre-anodized be put on.
..yikes. some of you are the reason i no longer post on the 996t section...arguing over a $100 beautiful made oem replica aero splitter...
the ebay aero is totally worth the $100. Atrox posted a picture of my old car w that same companys aero lip / splitter i made. That "company from ebay" is local to me and i have nothing by praises to say.
John T made it 2 piece as him and i were suppose to work on the splitter project together however my 996t suffered a rear end collision in stop in go traffic however i suggested 2 piece for several reasons...
my only "issue" with john t splitter is that it does NOT go all the way to the front of the wheels which will NOT generate all the downforce possible like the one i had (however you can retrofit his splitter to make it go all the way back). HOWEVER, i understand why- it's to "accommodate " for the masses as "most" do not track. IF you want a true - functional splitter- it MUST go back as far as possible.
Take a look what we're working on for the GT3- (99.99% sure ) it will be 1 of 1.
10-03-2016, 09:25 PM
