Black Lug Bolts
#1
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Black Lug Bolts
We have black lug bolts available in both conical seat and ball seat. We also have them available in different lengths for spacers and can mix sizes depending on what spacers you use or do not use on the front and rear. They are made from SCM435 hardened steel and they use a 17mm head size for wheels that have small lug holes.
Pictured are the cone seat bolts.
PRICE- $120.00/set
Give us a call at (310) 533-8900 and we can get them sent out to you on the same day that they are ordered. We are located in California so you can order them up to 6P.M. Easy Coast time and still get them out. We will also be stocking them in Pennsylvania soon at our East Coast location for low cost fast delivery to many locations.
Thanks-
-Craig
Pictured are the cone seat bolts.
PRICE- $120.00/set
Give us a call at (310) 533-8900 and we can get them sent out to you on the same day that they are ordered. We are located in California so you can order them up to 6P.M. Easy Coast time and still get them out. We will also be stocking them in Pennsylvania soon at our East Coast location for low cost fast delivery to many locations.
Thanks-
-Craig
#3
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
The bolt pictured is the conical seat but we also have them in ball seat. We do not have them in the two piece ball seat like the factory Porsche bolt. Porsche is the only company that uses that seat to prevent marring of the wheel under the bolt when it's torqued.
The black is done during the manufacturing process and is an oil based application that is durable and long lasting. It does not get chewed up or chipped when torqued. I will guarantee them for 6 months and I will also take them back and refund all your money if you are not happy with the quality of the bolt.
I understand that some people will want the exact Porsche sizing and these are not them. The Porsche uses a 19mm head and these are a 17mm head.
If you have any other questions please feel free to ask me.
-Craig
The black is done during the manufacturing process and is an oil based application that is durable and long lasting. It does not get chewed up or chipped when torqued. I will guarantee them for 6 months and I will also take them back and refund all your money if you are not happy with the quality of the bolt.
I understand that some people will want the exact Porsche sizing and these are not them. The Porsche uses a 19mm head and these are a 17mm head.
If you have any other questions please feel free to ask me.
-Craig
__________________
WORLD MOTORSPORTS
2170 W 190th Street Torrance, CA 90504
(310) 533-8900
- Akrapovic - BMC - TechArt - H&R - By Design - AMS - CSF - Kline - NGK - TiLugs - HRE - M Engineering - ID Injectors -
FULL SERVICE INSTALLATION FACILITY - STATE OF THE ART WIND TUNNEL DYNO - ECU TUNING
WORLD-MOTORSPORTS.COM
2170 W 190th Street Torrance, CA 90504
(310) 533-8900
- Akrapovic - BMC - TechArt - H&R - By Design - AMS - CSF - Kline - NGK - TiLugs - HRE - M Engineering - ID Injectors -
FULL SERVICE INSTALLATION FACILITY - STATE OF THE ART WIND TUNNEL DYNO - ECU TUNING
WORLD-MOTORSPORTS.COM
#4
Rennlist Member
Any chance for race studs?
#5
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter