UMW Flash Installed
11-30-2007, 07:22 PM
#1
Instructor
Thread Starter
Join Date: Sep 2007
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
UMW Flash Installed
Just got the UMW flash installed on my 2005 TTS (93/94 Octane program), and WHOA
The power band is quite different and feels a lot more linear than before. I didn't push too hard since my front alignment is a tad off, but saw 1.1 bar without too much difficulty, I would think 1.2-1.3 should not be a problem.
Europipe is on its way, so can't wait to get that installed next week!
Kevin, thanks agan, fantastic job.
The power band is quite different and feels a lot more linear than before. I didn't push too hard since my front alignment is a tad off, but saw 1.1 bar without too much difficulty, I would think 1.2-1.3 should not be a problem.
Europipe is on its way, so can't wait to get that installed next week!
Kevin, thanks agan, fantastic job.
11-30-2007, 07:43 PM
#5
Instructor
Thread Starter
Join Date: Sep 2007
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
Thinking about it, but ...
Last night, i had my Lexus snows put on at the shop, so my wife drove my Porsche home and in the process drove it over a curb in the parking lot. Prior to this, my car was spotless.
Damage - cracked side sill, mud flap, and left side undercarriage cover; gash in the fron wheel, and looks the alignment is slightly off. Porsche in Toronto just ordered the parts so I will be taking it in soon, so may just have them install the exhaust.
Last night, i had my Lexus snows put on at the shop, so my wife drove my Porsche home and in the process drove it over a curb in the parking lot. Prior to this, my car was spotless.
Damage - cracked side sill, mud flap, and left side undercarriage cover; gash in the fron wheel, and looks the alignment is slightly off. Porsche in Toronto just ordered the parts so I will be taking it in soon, so may just have them install the exhaust.
Trending Topics
11-30-2007, 09:57 PM
#11
Racer
Join Date: Jan 2006
Location: Melbourne, Australia
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
Both Kevin (UMW) & Stef (Europipe) are class acts!! You will be very happy with your EP S2 Loud. Some think I’m crazy, but I polished the internal section of my EP oversized exhaust tips….adds that finished look.
11-30-2007, 10:21 PM
#14
Racer
Join Date: Jan 2006
Location: Melbourne, Australia
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
Dock, they only blacken on start-up. I wait 30-40 seconds after start-up, wipe each internal side with a damp cloth (about a 10sec job either side). I've only polished once and they still look great!