EVOMS GT2 Bumper Fitment questions?
06-17-2007, 04:56 PM
#1
Instructor
Thread Starter
Join Date: May 2006
Location: Mansfield Ohio
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
EVOMS GT2 Bumper Fitment questions?
I bought a used GT2 bumper from a member a while back like 6months ago. He said he bought and had it installed by Evoms. It is a urethane bumper. Any how I noticed I may have to trim my inner fender since where the side markers are it flares out slightly.
My install issues are
1. Flares out on each side by the side markers.
2. Outside temp mounting issue. Seems to be no place to attach it.
NOT PICTURED
3. The opening in the front does not line up with the ducting to the middle radiator. Do I need another peice? It does not look that bad.
Here is a pic of the side front vents. THey are a little off.
4. Upper hood vent does not seem right?
5 Seems to be a V in the middle of the bumper near the top vent?
6. This area seems to need to be trimed so it will bolt to the inner fender and stop the flaring near the marker lights.
Any help would be appreciated!
Thanks
Ralph
My install issues are
1. Flares out on each side by the side markers.
2. Outside temp mounting issue. Seems to be no place to attach it.
NOT PICTURED
3. The opening in the front does not line up with the ducting to the middle radiator. Do I need another peice? It does not look that bad.
Here is a pic of the side front vents. THey are a little off.
4. Upper hood vent does not seem right?
5 Seems to be a V in the middle of the bumper near the top vent?
6. This area seems to need to be trimed so it will bolt to the inner fender and stop the flaring near the marker lights.
Any help would be appreciated!
Thanks
Ralph
Last edited by cpu77; 06-17-2007 at 05:11 PM.
06-19-2007, 11:00 PM
#2
Instructor
Thread Starter
Join Date: May 2006
Location: Mansfield Ohio
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Well thanks to Mike@Evoms who gave me a leg up on what I needed. Great guy who was willing to help out a fellow enthusiast.
I bought my parts from brandy wine
Wheel Wells 2x $160ea =$320
Left and Right side duct $160ea =$320
Center Duct =$75
Total =$715 plus shipping Just for the extra peices. I am surprised someone doesn't sell a kit.
I will easily have $2200 in this setup with a used bumper! I did buy a new GT2 chin spoiler for $110.
I think I will post pics of the final install and show the difference in parts. I will also list part numbers for people doing this cosmetic change. Not the OEM GT2 full change including radiator.
I bought my parts from brandy wine
Wheel Wells 2x $160ea =$320
Left and Right side duct $160ea =$320
Center Duct =$75
Total =$715 plus shipping Just for the extra peices. I am surprised someone doesn't sell a kit.
I will easily have $2200 in this setup with a used bumper! I did buy a new GT2 chin spoiler for $110.
I think I will post pics of the final install and show the difference in parts. I will also list part numbers for people doing this cosmetic change. Not the OEM GT2 full change including radiator.
