OK...I'm a convert...Zaino!
#17
Originally Posted by JohnnyBeatles
My clear shield is almost invisable. From 3 feet you cant even see it. Its saved me a few times already. Honestly I would have a car like this without it...
JB
JB
Wross: what is Hand buff with 'mf" ??
dont you use power buffer at all??
dont you use power buffer at all??
#18
wross, JB I assume left out the n't from wouldn't? LOL
and yes your Philly eyes are TOO good, stand further back!!
Well Marty it would take alot of tape!!
and yes your Philly eyes are TOO good, stand further back!!
Well Marty it would take alot of tape!!
Last edited by tkerrmd; 04-05-2006 at 02:39 PM.
#19
yes I left out the 'nt. I mean lets be honest I know where it is so if I walk up on it I can see the line. But if you don't know its there it's VERY tough to see. And even if you can barely see it what it saves in damage is well worth it.....
JB
JB
#21
Peace...I'm not going to argue this one. My paint guy can fix chips in the paint for less as long as there is no bra. BTW I have those things on 4 of my other cars, so I'm not against them and I know what they can and can not do...just not on my P-car!
#22
Originally Posted by wross996tt
Here is mine:
Day 1
1. RaggTopp cleaner
2. Dawn soap...wash the car, P21S Wheel cleaner
3. Zaino clay
3. Dawn wash
4. Dry with waffle towel and compressed air
5. Zaino Z-5 applied with PC (used ZFX with all)
6. hand buffed with MF
7. Spray Z-6, buffed with MF
8. Applied RaggTopp protectant (taped off top).
Day 2
9. Applied Z-2 with PC
10. Hand buffed with MF
11. Spray Z-6, buff with MF
12. Applied Z-2 with PC, buff with MF
13. Spray Z-6, buff with MF
14. Applied Poorboys Wheel Sealer, 2 coats (with Mother's powerball)
15. Appled Zaino tire stuff (2 coats)
16. Aerospace 303 to exterior plastic and interior dash/doors
17. Lexol on seats
18. Window cleaner (I forget which kind)
19. Drive like a bat out of H*LL
Day 1
1. RaggTopp cleaner
2. Dawn soap...wash the car, P21S Wheel cleaner
3. Zaino clay
3. Dawn wash
4. Dry with waffle towel and compressed air
5. Zaino Z-5 applied with PC (used ZFX with all)
6. hand buffed with MF
7. Spray Z-6, buffed with MF
8. Applied RaggTopp protectant (taped off top).
Day 2
9. Applied Z-2 with PC
10. Hand buffed with MF
11. Spray Z-6, buff with MF
12. Applied Z-2 with PC, buff with MF
13. Spray Z-6, buff with MF
14. Applied Poorboys Wheel Sealer, 2 coats (with Mother's powerball)
15. Appled Zaino tire stuff (2 coats)
16. Aerospace 303 to exterior plastic and interior dash/doors
17. Lexol on seats
18. Window cleaner (I forget which kind)
19. Drive like a bat out of H*LL
I too can see clear bra on cars, but I haven't had one without it in years.
#25
Originally Posted by wross996tt
No, but I might try...I have always loved P21S for ease of application and great results.
I've had a hard time finding the love for Zaino because of the long cure times at 70 degrees even with the accelerator. I felt I got equal results using 3M products and they are easier or I'm just used to them. I do think the Zaino lasts a little better.
Love the seats in your Turbo.
#26
Originally Posted by Boulder GT3
What temp did you put it on at and how long were your cure times?
I've had a hard time finding the love for Zaino because of the long cure times at 70 degrees even with the accelerator. I felt I got equal results using 3M products and they are easier or I'm just used to them. I do think the Zaino lasts a little better.
Love the seats in your Turbo.
I've had a hard time finding the love for Zaino because of the long cure times at 70 degrees even with the accelerator. I felt I got equal results using 3M products and they are easier or I'm just used to them. I do think the Zaino lasts a little better.
Love the seats in your Turbo.
#27
Originally Posted by wross996tt
I did it last weekend...so temps were 60-70. I allowed about 1 hour cure time and the Zaino polished right off. Are you using a PC? If not, that is your problem. 3M doesn't come close IMO (Klasse, Menzerna, P21S..are also better). Yeah, GT3 seats are awesome!
I was at Detailers Paradise and people seem to either swear by or at Zaino stuff. I'm in for round two.
#28
Originally Posted by Boulder GT3
Alright, based on this I'll give it a go again. The humidity was up when I did it so that may have been the issue. What is PC? I'm guessing that's the catalyst or whatever they call it that makes it set quicker. If that's the case I have it.
I was at Detailers Paradise and people seem to either swear by or at Zaino stuff. I'm in for round two.
I was at Detailers Paradise and people seem to either swear by or at Zaino stuff. I'm in for round two.
No PC is a Porter Cable (machine) and it really helps to break-down the wax which makes the wax perform the way it is supposed to. Since you are local, if you want I can drop by and let you try mine. I'm off to the Avs game this afternoon, but am around all week. Drop me a PM if interested. I'd love to see your GT3 and Gallardo!
#29
Originally Posted by wross996tt
No PC is a Porter Cable (machine) and it really helps to break-down the wax which makes the wax perform the way it is supposed to. Since you are local, if you want I can drop by and let you try mine. I'm off to the Avs game this afternoon, but am around all week. Drop me a PM if interested. I'd love to see your GT3 and Gallardo!