Richard.

Can I set this up by putting some sleeves on the struts that prevent it from settling flat on deck of the base. Will this cause probs with the strut
motor drive warning light ? Is it easy to take the spolier blade off the struts ?

Periokid

You can raise it and disconnect the wire harness. If you jump the 2 and 5 connector the warning light will remain off. Can someone confirm that it is the 2 and 5.

HAMMER502

THE WAY WE USED TO DO IT WAS TO RAISE THE SPOILER,TAKE OUT THE 2 RELAYS FOR OPERATION AND DISABLE THE WARNING LIGHT ON THE DASH WITH THE PST2 COMPUTER.