FS: 996GT2/GT3/Cup front upright assemblies
#1
Rennlist Member
Thread Starter
FS: 996GT2/GT3/Cup front upright assemblies
Hey gents. I swapped over to a 996RS suspension and as such no longer need my spare set of 996GT2/GT3/Cup front assemblies. These are lightly used but in excellent condition. Brand new OEM bearings were just installed and as such these need absolutely nothing, simply bolt on and go. Included are the uprights with installed bearings and hubs, speed sensors, and also the rather expensive OEM tension bolts and hub nuts. For anyone considering doing a RWD conversion to their car, this is the proper way to correct the front geometry. These uprights are used on all 996GT2/3 models along with the 996Cup. Part number is 996.341.657.91 for the left and 996.341.658.91 for the right. The tension bolts are part number 996.341.131.90. Porsche is no longer manufacturing these uprights so they have become a bit of a white unicorn. $1995 plus shipping. Buyer responsible for the 3% paypal fee.
#2
Nice. When swapping, are awd struts compatible with these, or do you need some for a C2? What about upper strut bearings at a different angle? Drop links?
Also, what makes these better than regular C2 stuff? Lowering spindle with less geometry change?
What all needs to change to make this work?
Also, what makes these better than regular C2 stuff? Lowering spindle with less geometry change?
What all needs to change to make this work?
#3
Rennlist Member
Drooling. But you already knew that. Lol.
#4
Rennlist Member
Thread Starter
Nice. When swapping, are awd struts compatible with these, or do you need some for a C2? What about upper strut bearings at a different angle? Drop links?
Also, what makes these better than regular C2 stuff? Lowering spindle with less geometry change?
What all needs to change to make this work?
Also, what makes these better than regular C2 stuff? Lowering spindle with less geometry change?
What all needs to change to make this work?
Since these uprights were originally used on the 996Cup, they utilize a substantially larger bearing than on the C2. I am not 100% familiar with the pickup points on the C2 upright and as such can't comment on a comparison.
#5
Rennlist Member
Thread Starter
#6
Rennlist Member
Hot damn John! These won't last long, Kevin already got this months toy funding otherwise I would be all over these!
#7
Rennlist Member
Thread Starter
No worries my friend. Looks like they may be sold anyway as I had 4 guys email me yesterday wanting to buy them so pending payment these are most likely gone. Tells me one thing, I asked too little..
Trending Topics
#8
Rennlist Member
When they line up like that it always does cause the thought of "Perhaps I left $500 on the table", I will be shopping for a set at some point this year for sure if you hear of another set that shows up here or there.
#9
Rennlist Member
Thread Starter
I'll let you know if I come across another set. I had 2 other sets of these and they both sold last month to fellow rennlisters. This was my last pair.
#10
Rennlist Member
Thread Starter
SOLD. Thanks everyone for looking..