pfbz

...and no pin or mechanical lock that you can set so it isn't resting on the hydraulics?

To justify the space it would take I'd like to use it as another workbench when I don't need it as a hydraulic table, but staying in the up position would be kind of necessary for that.

mffarrell

911 Rod

I guess you get what you pay for. This sounds scarier than my current 24" x 28" table.

Jferrante

I see if you need it as a table to stay up overnight but if it is just for your motor i think the price is attractive enough to use for the random motor drops. Unless of course you sleep underneath the table...

911 Rod

$150 used. But only rated for 600 lbs.

mffarrell

It looks like the Harbor Freight one, except the color. For $200, you can't go wrong for the 1k lb. one at HF. Or, you can purchase Snap On for $7k. That's the one some of the Porsche shops use.

Quadcammer

my harbor freight didn't leak down at all. Then again, i'm not sure why you'd leave it up overnight. just lower it down or allow it to lower itself as it leaks

911 Rod

The HB 1,000 lb is $649.00 here.

mffarrell

Why so much?

911 Rod

Not sure. Its' the Princess Auto Version in Canada.
Still think it is too small.
I'm like this at 30" x 60"

32krazy!

thats not the h/f table this is https://www.harborfreight.com/1000-l...art-69148.html


you can even use a motorcylce lift with locking arms and a pow profile trans jack from h/f

dprantl

HF won't ship anything over 150lbs to Canada...

Dan

911 Rod

I actually found the HF one here locally in Toronto for $529 + tax.
Didn't buy it.

911 Rod

Might have a winner, but no labels.
2'x4'
Any guess on capacity?

32krazy!

look at the bottle jack underneath for weight capacity