rbahr

Hi All, These are 10x50 but what is the thread pitch - to lazy to pull one out and measure

Thanks

Ray

AudiOn19s

PET usually shows thread pitch but it doesn't for those particular bolts....weird.

lordpantsington

I couldn't find anything in PET either.
Looks like most of the Cup/RS/RSR ran grade 12.9 bolts though.

Took this:
http://www.fvd.de/assets/adb/a1/a162919db64d66bc.jpg
Scaled to length (image size to 92.863 pixels per cm),
Measured the length of 19 threads as 28.2mm, so looks likely 1.5mm