Notices
996 GT2/GT3 Forum 1999-2005

Just got my 996 GT3 Dyno'ed

Thread Tools
 
Search this Thread
 
Old 09-05-2014 | 11:30 PM
  #1  
RedHondaSi's Avatar
RedHondaSi
Thread Starter
Track Day
 
Joined: Jul 2012
Posts: 16
Likes: 0
From: Central Ohio
Default Just got my 996 GT3 Dyno'ed

Don't know how it compares to other Dynos...didn't get much of a chance to open it up much due to rush hour traffic. Throttle response has greatly increased with the LWFW.
374 hp/291 tq at the rear wheels. Net gain 20HP and 11 ft lbs on the tune. Flattened out a little @ 5500, from the changeover?

04 Seal Gray 34242 miles
I had the exhaust and intake.
Upgraded the flywheel, clutch, pulley, EVOM tune, and pinned the coolant lines.



Mods:
RS 11lb Flywheel, RS crank pulley, Stage 3 clutch, Carbon Fiber Competition Air Intake, Fabspeed Sport Cat X-Pipe, Fabspeed muffler bypass pipe and a EVOMSit tune on 5 SEP 14
Old 09-07-2014 | 09:08 AM
  #2  
AudiOn19s's Avatar
AudiOn19s
Race Car
 
Joined: Jun 2005
Posts: 4,511
Likes: 49
From: Columbus OH
Thumbs up

Nice numbers!
Old 09-07-2014 | 12:14 PM
  #3  
996FLT6's Avatar
996FLT6
Rennlist Member
 
Joined: Aug 2001
Posts: 14,152
Likes: 263
From: san francisco
Default

I had 363 hp/313 trq with fab mufflers with catbypass stock airbox lwf no tune dynojet. Mike
Old 09-07-2014 | 12:33 PM
  #4  
Burger's Avatar
Burger
Pro
 
Joined: Jun 2010
Posts: 511
Likes: 13
From: Cincinnati, OH
Default

Every dyno is different. Comparing numbers from the same dyno in similar weather conditions is the most reliable way to use them as a tuning tool.

20hp is a decent gain.
Old 09-07-2014 | 12:44 PM
  #5  
996FLT6's Avatar
996FLT6
Rennlist Member
 
Joined: Aug 2001
Posts: 14,152
Likes: 263
From: san francisco
Default

Yep wished I had a baseline stock reading then add mods to see hp difference. Got bored doing a NASA event at thill where I had 3 hrs to kill between sessions so had mce engineering onsite strap it on the dyno. Mike
Old 09-07-2014 | 10:29 PM
  #6  
RedHondaSi's Avatar
RedHondaSi
Thread Starter
Track Day
 
Joined: Jul 2012
Posts: 16
Likes: 0
From: Central Ohio
Default

Most of the mods were done by the PO. The gains shown was just from the tune, I believe.

313 ft lbs to the wheels is very strong for the 3.6.
Old 09-07-2014 | 10:38 PM
  #7  
996FLT6's Avatar
996FLT6
Rennlist Member
 
Joined: Aug 2001
Posts: 14,152
Likes: 263
From: san francisco
Default

^ I have to say I do have a Copans 4.0 r/p so it's my only explanation why the trq is higher and u feel the trq. My 3rd feels like my 2nd gear pull. Mike
Old 09-07-2014 | 10:42 PM
  #8  
996FLT6's Avatar
996FLT6
Rennlist Member
 
Joined: Aug 2001
Posts: 14,152
Likes: 263
From: san francisco
Default

On the NorCal tracks with rp I never need to use 2nd gear just 3/4 sometimes 5 when at thill. Mike
Old 09-08-2014 | 12:19 PM
  #9  
AudiOn19s's Avatar
AudiOn19s
Race Car
 
Joined: Jun 2005
Posts: 4,511
Likes: 49
From: Columbus OH
Default

Originally Posted by RedHondaSi

313 ft lbs to the wheels is very strong for the 3.6.
Where do you get 313? I see 291 which is still pretty strong for a 3.6

I have exhaust w/ x-pipe on my car and still make less torque than you...again great numbers
Old 09-08-2014 | 01:05 PM
  #10  
RedHondaSi's Avatar
RedHondaSi
Thread Starter
Track Day
 
Joined: Jul 2012
Posts: 16
Likes: 0
From: Central Ohio
Default

Originally Posted by AudiOn19s
Where do you get 313? I see 291 which is still pretty strong for a 3.6

I have exhaust w/ x-pipe on my car and still make less torque than you...again great numbers
My apologies, I was replying to 996FLT6's post on his numbers , right below your first post.
Thank you.
Old 09-08-2014 | 01:46 PM
  #11  
AudiOn19s's Avatar
AudiOn19s
Race Car
 
Joined: Jun 2005
Posts: 4,511
Likes: 49
From: Columbus OH
Default

Originally Posted by RedHondaSi
My apologies, I was replying to 996FLT6's post on his numbers , right below your first post.
Thank you.
Ha. Clearly I need more coffee this morning.



Quick Reply: Just got my 996 GT3 Dyno'ed



All times are GMT -3. The time now is 08:41 PM.