DRPM

Would appreciate some assistance regarding the Part number list (recipe) for the LWFW and 4.0 Clutch kit (that I believe most guys are using vs the stock clutch kit) with pressure plate, ring gear, bolts, TO bearing, etc

thanks in advance

kk2

get the kit from suncoast..

http://www.suncoastparts.com/product...EnginetransGT3

Also, remember that you will need a lightweight pulley. I use evoms.

DRPM

Thanks very much.

What about replacing the pressure plate? Part Number?

kk2

That's part of the kit too.

cfjan

I had that kit installed. Direct bolt-on! Also used the EVOMS pulley as well!

DRPM

Great Thanks again!

Please let me know details i.e. what in the PN of the front pulley and EVOMS contact info.

kk2

http://www.evoms.com/Porsche_996_GT3..._p/epk-gt3.htm

Enjoy! It really wakes the car up.

EVOMS

The pulley is a great product! It pairs well with the LWFW and is a meaningful reliability upgrade for cars that are driven hard. We've got pullies on hand, just need to pin them for the 6 GT3. Order online (make sure you mention it's for a 996 in the comments!), call me at 480-317-9911, or email at sstone@evoms.com for more information to order.

Sam

cfjan

Sam,

What's the difference between the 996 version vs. 997 version?

EVOMS

We use a shorter crank pin on the 996. The pulley itself is the same.

Sam

cfjan

Thanks! I hope the shop I used ordered the right one.. (it was installed earlier this year.. !)