IanM

It looks like the used Volk TE37's that I bought are not quite the correct offsets. They were used on a 997 C2S. The front / rear offsets are 49mm / 60mm, compared to 40mm / 63mm stock. So the rears will stick out 3mm which is fine, but the fronts will be inboard by 9mm.

So I'm looking for two 14 or 15mm spacers for the front of my car, and a set of studs/lug nuts for all the way around. The Apex website shows them as being out of stock on the studs I'm interested in (M14x1.5 ACS Race Stud - 80mm). Does anyone have any used spacers or studs for sale?

Turn3 Autosport

Ian,

May have spacers in stock, will check. Can source studs as well if required.

Cheers