GT1 Coolant Pipe Prevention / Fix @ Shark Werks
#61
Rennlist Member
Never seen an actual wheel swap on CL's til I saw Mooty trying to change out. What a pita. Mooty is definitely a happy camper with the 5 lug conversion. If u get it either welded or pinned change all the hoses(safety wire the hoses too- they can pop as well)too and also check intake manifold hoses as well. My plenum hoses(8 years old) was hard and brittle- changed them all while motor is dropped. Mike
#63
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
We've re-done our web site so for those of you that need access to the article/write-up it's actually here below (and obviously on the 996TT/GT3/GT2 you do not need the additional oil cooler elbows):
https://www.sharkwerks.com/tech-arti...gt2-turbo-cars
https://www.sharkwerks.com/tech-arti...gt2-turbo-cars
The following 2 users liked this post by sharkster:
nexus77241 (03-14-2023),
SupraSaiyan (03-15-2023)