Overdraft

In a rush when I picked up my car last week, I failed to ask the Porsche dealer about my inspectioon done which he says the car was "Excellent". Everything was pretty straight forward except I am not quite clear on - 'Engine Revolutions Report' It says;

Range Number 1 - Ignition 7082 - Hours 712.7
Range Number 2 - Nothing under ignition yet hours says 832.2
Nothing on range 3 through 6 under either heading.

What does this mean?

THX guys.

roberga

pretty sure it means the PO hit the rev limiter which has zero negative effects on the car. Not sure with the #2 there should be numbers displayed if there were hits. There are no 3-6 in the 996.

flankenspeil

no ignitions in range 3-6 is what you want to see..

LVDell

There are no values in the 996 for 3-6.

We only have Type 1 (banging against the rev limiter) and Type 2 (mechanical over-rev! bad.) rev counts.

It will state the hour when the last rev count took place for that range. Odd that there is a value for hours but not ignitions for Type 2.

enthusiast

That report does not make sense. What kind of car did that come from???

see this recent thread

https://rennlist.com/forums/996-gt2-...questions.html

Overdraft

Thanks - that was a good thread. Now somewhat educated, I will speak with the Porsche tech when I pick up my old seats in the morning and discuss it first hand with him.

THX

enthusiast

Your welcome. If it is a different Porsche model than the 2004-2005 GT3, you need the relevant description for that DME version.