* 996 GT2/3 REPLACEMENT discs - GiroDiscs. Comprehensive information & pictures*
#47
Rennlist Member
Join Date: Feb 2003
Location: Glasgow,Scotland,UK
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Looks a nice piece of kit, reckon as good as Alcon?? I've got big Alcons on fr which may need changed soonish , they are great but pricey, last long tho.
pm me with 350 fr standard 996GT3 Mk1 rear shipped to UK
Mike
pm me with 350 fr standard 996GT3 Mk1 rear shipped to UK
Mike
#51
Rennlist Member
#55
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Everything installed properly, with rear caliper spacers.
I noticed earlier one person stated the wires for the rear wear sensors and ABS were stretched tight after installing the rear rotors. For non-PCCB/steel brake equipped GT3's the rear caliper bracket which holds the brake pad wear sensor and brake line is not long enough when up sizing to 350mm rotors.
PCCB equipped 996GT3's call for a different bracket which is a bit wider, and these two parts work well when sizing up the rotors. For anyone switching from 330-350mm rear rotors, $15.00 and these two factory Porsche parts get the job done correctly. Please note you must detach the rear brake line while installing these two brackets.
I put SS brake lines on the car while installing the new front and rear rotors so already had to do this to install the new brackets which was a piece of cake. The new brackets end in .10.
I noticed earlier one person stated the wires for the rear wear sensors and ABS were stretched tight after installing the rear rotors. For non-PCCB/steel brake equipped GT3's the rear caliper bracket which holds the brake pad wear sensor and brake line is not long enough when up sizing to 350mm rotors.
PCCB equipped 996GT3's call for a different bracket which is a bit wider, and these two parts work well when sizing up the rotors. For anyone switching from 330-350mm rear rotors, $15.00 and these two factory Porsche parts get the job done correctly. Please note you must detach the rear brake line while installing these two brackets.
I put SS brake lines on the car while installing the new front and rear rotors so already had to do this to install the new brackets which was a piece of cake. The new brackets end in .10.
![](http://i548.photobucket.com/albums/ii326/kkohen_photo/996GT3Rearcaliperbrakelinebracket-1.jpg)
#57
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hello,
Could i please have a price on the following options for a PCCB equipped 996 GT3;
Front Only
a. delivered to UK
b. delivered to Miami
Front/Rears
c. delivered to UK
d. delivered to Miami
Also, how much do they each weigh?
Thanks
Could i please have a price on the following options for a PCCB equipped 996 GT3;
Front Only
a. delivered to UK
b. delivered to Miami
Front/Rears
c. delivered to UK
d. delivered to Miami
Also, how much do they each weigh?
Thanks