Lowering the ride height on the 996 GT3
06-28-2007 | 08:33 PM
#31
Thread Starter
Rennlist Member
Joined: Aug 2006
Posts: 2,529
Likes: 66
From: Finland
OK, I measured the height at the front... a whopping 134mm 
Time to drop the biatch!!!
Edit: Measured from wrong location first...now corrected!
Time to drop the biatch!!!
Edit: Measured from wrong location first...now corrected!
Last edited by Juha G; 06-28-2007 at 09:35 PM.
06-29-2007 | 10:19 AM
#33
Thread Starter
Rennlist Member
Joined: Aug 2006
Posts: 2,529
Likes: 66
From: Finland
Originally Posted by AudiOn19s
Get the Spanner wrenches out...just make sure to have it re-alligned after you're done setting height.
Andy
Andy
I tried to lower the front last night but couldn't get the locking ring to open up.
They were so tight together. I used some WD40 on the thread but that usually doesn't help before you get the thread to slightly open up...
I'm gonna see if I could take it to a shop today to lower it and have the alignment done...
