RS-19 Pagid Pads Question
12-14-2005, 02:12 PM
#16
Pro
Join Date: Dec 2002
Posts: 664
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Jason @ Paragon Products
By mistake and only for a (short) while the factory in Germany made 2707RS29 with anti noise shims and consequently a little thinner.
12-14-2005, 02:54 PM
#17
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Originally Posted by Jason @ Paragon Products
Plus Porsche has changed the drawing for the 2707. It used to be in the beginning 16.5mm and is now 18mm.
We make also some special RS19 and RS29 pads in 20mm for the 24h race in Daytona.
We make also some special RS19 and RS29 pads in 20mm for the 24h race in Daytona.
__________________
Larry Herman
2016 Ford Transit Connect Titanium LWB
2018 Tesla Model 3 - Electricity can be fun!
Retired Club Racer & National PCA Instructor
Past Flames:
1994 RS America Club Racer
2004 GT3 Track Car
1984 911 Carrera Club Racer
1974 914/4 2.0 Track Car
CLICK HERE to see some of my ancient racing videos.
Larry Herman
2016 Ford Transit Connect Titanium LWB
2018 Tesla Model 3 - Electricity can be fun!
Retired Club Racer & National PCA Instructor
Past Flames:
1994 RS America Club Racer
2004 GT3 Track Car
1984 911 Carrera Club Racer
1974 914/4 2.0 Track Car
CLICK HERE to see some of my ancient racing videos.
12-15-2005, 06:23 PM
#18
Still plays with cars.
Lifetime Rennlist
Member
Jason - two things, please.
1) Do they still make the 19 or 29 with the anti-squeal shims? They shims work and the pads make no noise compared to the ones without. since I run the RS 19 all the time, no squeal is nice to the neighbors!
2) Do you have specs on the thickness of the current 29 versus the 19? I had a set in my hand and the RS 29 was a lot thinner than the new RS-19 I had in my other hand. Are they both the same thickness now? I'd guess at the RS-19 being about 11 mm. Like Larry I had a hard time installing them with new rotors. Ended up removing the anti squeal "spiders" (probably not the right word) to get them in.
Best,
1) Do they still make the 19 or 29 with the anti-squeal shims? They shims work and the pads make no noise compared to the ones without. since I run the RS 19 all the time, no squeal is nice to the neighbors!
2) Do you have specs on the thickness of the current 29 versus the 19? I had a set in my hand and the RS 29 was a lot thinner than the new RS-19 I had in my other hand. Are they both the same thickness now? I'd guess at the RS-19 being about 11 mm. Like Larry I had a hard time installing them with new rotors. Ended up removing the anti squeal "spiders" (probably not the right word) to get them in.
Best,
