Installed Cup Car Mesh screens
10-03-2004, 08:46 PM
#1
Rennlist Member
Thread Starter
Join Date: Nov 2002
Location: Between rock and hard place
Posts: 3,819
Received 1,223 Likes
on
664 Posts
Installed Cup Car Mesh screens
Picked up these mesh screens from Gert, however they dont fit with the "Frame" around the front bumper, no big deal, so I removed the frame. 
The screens work great. I was at the track and they stopped most of the larger chunky debris from getting into the radiators. No rubber pieces and no big rocks. Yeeehhhaaa.
The screens work great. I was at the track and they stopped most of the larger chunky debris from getting into the radiators. No rubber pieces and no big rocks. Yeeehhhaaa.
10-04-2004, 02:35 PM
#2
Instructor
Were you able to see any increase in oil/water temperature? The screens, by design, must limit the airflow somewhat. The question is whether there is enough cooling margin to allow the reduced flow.
10-05-2004, 12:36 AM
#4
The Rebel
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Cosmos,
Actually there were some individuals that posted before that were pretty concerned with the negative effects of the metal mesh so plima's question is in line with the thinking of many others. None the less I'm glad to here that it hasn't affect the oil or water temp in any way.
Now for the most important part, how about some photos!!
Actually there were some individuals that posted before that were pretty concerned with the negative effects of the metal mesh so plima's question is in line with the thinking of many others. None the less I'm glad to here that it hasn't affect the oil or water temp in any way.
Now for the most important part, how about some photos!!