Notices
996 GT2/GT3 Forum 1999-2005
Sponsored by:
Sponsored by:

996 GT2 rear brake duct ?

Thread Tools
 
Search this Thread
 
Old 08-13-2018, 10:01 AM
  #16  
993GT
Rennlist Member
 
993GT's Avatar
 
Join Date: Jun 2009
Posts: 6,745
Received 545 Likes on 331 Posts
Default

for frontward portion, similar area occupied by 6GT2 ducts (but mount on thrust arm and not lca): 997TT left 99733148702 + 997TT right 99733148802, trimming of ducts is required to clear fender line
rearward/lower portion of brake 7GT2RS left 99757553190 + 7GT2RS right 99757553290



Originally Posted by 32krazy!
i have the 6gt2 setup. wondered what the part # was for the units you replaced your gt2 setup with. the 997 parts
Old 08-13-2018, 10:03 AM
  #17  
spiller
RL Community Team
Rennlist Member
 
spiller's Avatar
 
Join Date: Dec 2012
Location: Adelaide, Australia
Posts: 2,528
Received 332 Likes on 203 Posts
Default

Originally Posted by 993GT
talking about the front ducts or rear ducts? fronts take a beating and keep going, rears are mega fragile...maybe its the updated part numbers(?) that are junk-which certainly could be, just like splitters, some were mega fragile but current one happily scrapes for days... fronts are nice heavy flexible plastic, rears are the cheapest hard plastic china ever cast...
sorry talking about front and rear, I was not very clear! Front cup and standard ducts are flexible yes, but the clips that hold them on are weak. Wouldn’t run the expensive cup car ducts without multiple cable ties to prevent loss when going down the road. I agree, GT2 rear ducts are overpriced for what they are (all the 996 ducts are, whether it be front, rear, cup car, street car!). Amazing what Porsche can charge for a few bits of plastic.
Old 08-13-2018, 10:52 AM
  #18  
32krazy!
Drifting
 
32krazy!'s Avatar
 
Join Date: Jun 2012
Posts: 3,050
Likes: 0
Received 32 Likes on 24 Posts
Default

Originally Posted by 993GT
for frontward portion, similar area occupied by 6GT2 ducts (but mount on thrust arm and not lca): 997TT left 99733148702 + 997TT right 99733148802, trimming of ducts is required to clear fender line
rearward/lower portion of brake 7GT2RS left 99757553190 + 7GT2RS right 99757553290
thanks i have the gt2 fronts and gt3 rear setup along with the 997tt ductwork for the rear that attaches to the underpanels. i guess ill just fiberglass my broken rear setup and reinstall it



Quick Reply: 996 GT2 rear brake duct ?



All times are GMT -3. The time now is 02:34 AM.