Seat Memory
10-25-2003 | 04:31 PM
#2
Advanced
Joined: Jul 2003
Posts: 84
Likes: 0
From an earlier thread:
https://rennlist.com/forums/showthre...eat+memory+key
1. Switch the ignition on with the desired vehicle key
2. Set the desired seat, lumbar and door-mirror position. If you wish for the passenger's mirror to swivel down as a parking aid when reversing, reverse gear must be engaged when the seat position is stored.
3. Keep memory button M depressed and press the central locking button on the remote control within 5 seconds. The individual setting is now assigned to this remote control.
...for setting the memory to one of the buttons (1, 2, or 3) it's the same except in the steps above you hold down the number button rather than central locking button on your remote.
https://rennlist.com/forums/showthre...eat+memory+key
1. Switch the ignition on with the desired vehicle key
2. Set the desired seat, lumbar and door-mirror position. If you wish for the passenger's mirror to swivel down as a parking aid when reversing, reverse gear must be engaged when the seat position is stored.
3. Keep memory button M depressed and press the central locking button on the remote control within 5 seconds. The individual setting is now assigned to this remote control.
...for setting the memory to one of the buttons (1, 2, or 3) it's the same except in the steps above you hold down the number button rather than central locking button on your remote.