Anti squeal shims....what kind of adhesive?
10-09-2010, 12:48 PM
#4
Nordschleife Master
Join Date: Nov 2008
Location: Mooresville, IN (Life Long Cheesehead)
Posts: 5,815
Likes: 0
Received 55 Likes
on
36 Posts
How about this stuff?
http://www.pelicanparts.com/cgi-bin/...%2C%20300%20ml
I know some parts stores also have a paste you brush on the back side of the pads for the same result. Don't know if this what you are looking for. Hope it helps.
http://www.pelicanparts.com/cgi-bin/...%2C%20300%20ml
I know some parts stores also have a paste you brush on the back side of the pads for the same result. Don't know if this what you are looking for. Hope it helps.
10-09-2010, 12:54 PM
#5
Parts Specialist
Rennlist Member
Rennlist Member
Pete... you run dry?
I put nothing on the 86' pads....normally I use some orange pasty stuff I have several bottles of....but I went dry.... easier to remove, seems I go thru pads faster than when I was young
I put nothing on the 86' pads....normally I use some orange pasty stuff I have several bottles of....but I went dry.... easier to remove, seems I go thru pads faster than when I was young
10-09-2010, 01:07 PM
#6
Nordschleife Master
Join Date: Nov 2008
Location: Mooresville, IN (Life Long Cheesehead)
Posts: 5,815
Likes: 0
Received 55 Likes
on
36 Posts
Yup.....never had a squeal issue........until I put my street pads on last weekend after a DE. First time it happened. I have some gooey stuff to put on and will do so this weekend. Got it from Autozone. My neighbor who has a 964 put some sort of silicone rubber based product on his pads and he has no noise at all. It is red or orange don't recall. btw...he is currently driving 10 hours out to NY for a DE at the Glen. Lucky bastard.
Trending Topics
10-09-2010, 01:26 PM
#9
Parts Specialist
Rennlist Member
Rennlist Member
you know me... never have just one of anything
use this stuff.. but a little is fine. You dont have to and if they make noise you can always add it later - you apply it on the contact areas... smells great when it gets hot
use this stuff.. but a little is fine. You dont have to and if they make noise you can always add it later - you apply it on the contact areas... smells great when it gets hot
Last edited by ivangene; 11-07-2010 at 12:04 PM.
10-09-2010, 02:10 PM
#12
Nordschleife Master
Thread Starter
Ok now you guys are avoid the question regarding the adhesive (like my kids when I ask them if their rooms are clean). Is there an adhesive?
10-09-2010, 02:32 PM
#14
Parts Specialist
Rennlist Member
Rennlist Member
NO - not that I know of
contact area = the place metal and metal would touch (piston ring - circle- to back of pad)
and I was going to clan my room right after this part.. I just found a cool part and I want to pass it first....see I made the skater fly.. its a glitch.. cool dad, huh? cool right??
contact area = the place metal and metal would touch (piston ring - circle- to back of pad)
and I was going to clan my room right after this part.. I just found a cool part and I want to pass it first....see I made the skater fly.. its a glitch.. cool dad, huh? cool right??
