Completed Maintenance @ 105K
01-04-2010, 08:11 PM
#16
Racer
Thread Starter
Join Date: Jun 2004
Location: Brandon FL
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts
Charles,
One thing on the new tool. Need to add a washer between the nut and the under the barrel. Mine started to gaul and spin the barrel in the IMS flange area. I really didn't want the steel barrel spinning on the aluminum block. I filed off the gaul and added a oiled washer. Just an idea for future tools. Other then that it worked great and the bearing came out much easier then I was expecting.
Thanks
Rick
99 996C4
87 944S
One thing on the new tool. Need to add a washer between the nut and the under the barrel. Mine started to gaul and spin the barrel in the IMS flange area. I really didn't want the steel barrel spinning on the aluminum block. I filed off the gaul and added a oiled washer. Just an idea for future tools. Other then that it worked great and the bearing came out much easier then I was expecting.
Thanks
Rick
99 996C4
87 944S
Last edited by rb101; 06-09-2010 at 08:52 PM.
