Notices
996 Forum 1999-2005
Sponsored by:

Porshce 996 advice Engine Failures

Thread Tools
 
Search this Thread
 
Old 03-08-2009, 07:24 AM
  #1  
labikes
4th Gear
Thread Starter
 
labikes's Avatar
 
Join Date: Mar 2009
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default Porshce 996 advice Engine Failures

Hello everyone: I am a fellow Porsche lover and a prior owner of a 2001 Boxster S and 1997 Boxster. I sold my 2001 Boxster S in hope of stepping up to my dream car a C2 or C4 996. I started looking in the auto trader and found a few, for a weird reason I did a search on the reliability of these beauties and discovered a ton of sites discussing engine failures and how there may be a flaw in the design of the motor. Please help a fellow Porsche lover, I am ready to purchase my dream car and discovered all these issues with them. Any advice or experience. I may have just been reading all of the negative on these vehicles and would like to hear if alot of Porsche owners experience the same. Thanks everyone in advance.
Old 03-08-2009, 07:34 AM
  #2  
JDSStudios
Burning Brakes
 
JDSStudios's Avatar
 
Join Date: Jan 2007
Location: Mississauga, Canada
Posts: 1,093
Received 6 Likes on 4 Posts
Default

welcome to the forum.
If you go to "search", you will find the info you are looking for.
Also, Jake Raby and LN Engineering have interesting on going tests and solutions
for some models.
Old 03-08-2009, 10:54 AM
  #3  
Barn996
Race Director
 
Barn996's Avatar
 
Join Date: Sep 2007
Location: Kittery, Maine
Posts: 11,801
Received 14 Likes on 12 Posts
Default

Not every 996 owner has experienced engine problems or failures, but they do exist. That being said, there is hope for 'fixes' and preventive cures as mentioned above. In my opinion, much of the problems are blown out of proportion due to the internet, as the majority at least on this forum have not had major engine issues.(I hope I didn't jinx myself). Search is your friend, and there is lots of info about engine issues.GL
Old 03-08-2009, 10:58 AM
  #4  
DFC
Rennlist Member
 
DFC's Avatar
 
Join Date: Jan 2007
Location: Ohio
Posts: 1,171
Likes: 0
Received 0 Likes on 0 Posts
Default

May need to be a member to read, but here is a good article.

http://www.renntech.org/forums/index.php?showtopic=6470

I also recommend this 996 book.

http://www.amazon.com/Porsche-996-Es...6520680&sr=8-1
Old 03-08-2009, 11:21 AM
  #5  
gota911
Newbies Hospitality Director
Lifetime Rennlist
Member
 
gota911's Avatar
 
Join Date: Apr 2005
Location: Winston-Salem, NC
Posts: 18,084
Likes: 0
Received 33 Likes on 33 Posts
Default

Labikes, welcome to Rennlist.

If you did a survey of people that went to the doctor's office, what percentage do you think would say that they went there because they were sick or something was wrong. Probably about 85% to 90%. The other 10% to 15% went for a checkup. What percentage of car enthusiasts start a thread stating that there is nothing wrong with their car? Probably 1%. Most threads get started because someone has an "issue" and needs to get it resolved, which is why there seems to be a disproportionate amount is "issues" with the 996.

How many engine failures did you have on your 2001 Boxster? How many RMS leaks did you have on it? The Boxster and 996 engines share a lot of the same parts and were built on the same basic design, good or bad. The point I am making here is that, as others have already stated, the issue has been blown out of proportion. Only Porsche knows what percent of all 996 engines have had a catastrophic failure, and they are not releasing that data. Most agree that it is a higher percent that it should be, but who knows for sure.

Here is a link to a thread started by one of the guys as he was doing a search for another 996. There is some good info in it.

Ultimate Pre-owned 996 Buying Guide

In general, buy the newest 996 you can afford, and if you are worried about engine failure, get a CPO (Certified Pre Owned) car from a dealer, or get an aftermarket warranty to cover the drive train. A new engine will cost between $12K and $15K installed, so you have to evaluate the relative cost of the warranty versus the potential risk of an engine failure.

We are here to help answer any specific questions you may have going forward. More general questions like "What is the meaning of life?" and "Will my engine fail?" will get you 16,543 different answers and a lot of debate.

Last edited by gota911; 03-08-2009 at 01:23 PM.
Old 03-08-2009, 11:48 AM
  #6  
ivangene
Parts Specialist
Rennlist Member
 
ivangene's Avatar
 
Join Date: Aug 2008
Posts: 16,326
Likes: 0
Received 24 Likes on 17 Posts
Default

+1 Tim, great way to put it.... we should pin this repsonse
Old 03-08-2009, 01:25 PM
  #7  
gota911
Newbies Hospitality Director
Lifetime Rennlist
Member
 
gota911's Avatar
 
Join Date: Apr 2005
Location: Winston-Salem, NC
Posts: 18,084
Likes: 0
Received 33 Likes on 33 Posts
Default

Thanks Ed. Maybe that will help in the future.
Old 03-08-2009, 01:52 PM
  #8  
ivangene
Parts Specialist
Rennlist Member
 
ivangene's Avatar
 
Join Date: Aug 2008
Posts: 16,326
Likes: 0
Received 24 Likes on 17 Posts
Default

Originally Posted by gota911
Thanks Ed. Maybe that will help in the future.
I hope not MY future
Old 03-08-2009, 03:29 PM
  #9  
htny
Three Wheelin'
 
htny's Avatar
 
Join Date: Dec 2007
Location: NY/LA
Posts: 1,558
Received 3 Likes on 3 Posts
Default

The flaws you speak of were far more prevalent in the 97 boxster that you owned, and have decreased over time as they continued to quietly (emphasis quietly) improve the process and design. While you may not have known the risks at the time, you saw fit to pick up another boxster, so don't sweat it. Same motor in the 996, just bigger, same basic issues. Best advice I can give you, buy a car with a warranty, CPO or otherwise. Sleep well at night
Old 03-09-2009, 09:13 AM
  #10  
granracing
Advanced
 
granracing's Avatar
 
Join Date: Jan 2009
Location: CT
Posts: 74
Likes: 0
Received 0 Likes on 0 Posts
Default

Very well put Tim.
Old 03-09-2009, 10:40 AM
  #11  
rotokim
Burning Brakes
 
rotokim's Avatar
 
Join Date: Jan 2004
Location: Apex, NC
Posts: 1,113
Received 6 Likes on 4 Posts
Default

Nicely stated, Tim. I hope your comments eliminate anyone's need to throw a grenade.

Bob
Old 03-09-2009, 10:43 AM
  #12  
gota911
Newbies Hospitality Director
Lifetime Rennlist
Member
 
gota911's Avatar
 
Join Date: Apr 2005
Location: Winston-Salem, NC
Posts: 18,084
Likes: 0
Received 33 Likes on 33 Posts
Default

Thanks guys!
Old 03-09-2009, 12:22 PM
  #13  
Patrick E
Rennlist Member
 
Patrick E's Avatar
 
Join Date: Oct 2002
Location: Charlotte, NC
Posts: 994
Received 57 Likes on 36 Posts
Default

Great job, Tim. Now, can you tell him what type of oil he should use?
Old 03-09-2009, 01:22 PM
  #14  
redridge
Nordschleife Master
 
redridge's Avatar
 
Join Date: Oct 2006
Posts: 7,446
Received 62 Likes on 49 Posts
Default

Originally Posted by Patrick E
Great job, Tim. Now, can you tell him what type of oil he should use?
I believe Hondas' use 10w-40.....

Nice post Tim...
Old 03-09-2009, 02:30 PM
  #15  
gota911
Newbies Hospitality Director
Lifetime Rennlist
Member
 
gota911's Avatar
 
Join Date: Apr 2005
Location: Winston-Salem, NC
Posts: 18,084
Likes: 0
Received 33 Likes on 33 Posts
Default

Thanks Red!

Actually, Honda recommends.... you aren't going to believe this.... 0W-20 oil for my car! I am not kidding!


Quick Reply: Porshce 996 advice Engine Failures



All times are GMT -3. The time now is 04:08 AM.