Notices
996 Forum 1999-2005
Sponsored by:

Automatic spoiler extension question

Thread Tools
 
Search this Thread
 
Old 02-21-2009, 10:27 AM
  #46  
kas930
Rennlist Member
Thread Starter
 
kas930's Avatar
 
Join Date: Oct 2007
Location: Newburgh, Indiana
Posts: 94
Likes: 0
Received 1 Like on 1 Post
Wink

I finally had a chance to take my car in and have the spoiler looked at. Using the PST2, the spoiler was recoded and is now working properly (extends at 75 and lowers at 37. All at no charge to me.
Old 02-21-2009, 10:38 AM
  #47  
DFC
Rennlist Member
 
DFC's Avatar
 
Join Date: Jan 2007
Location: Ohio
Posts: 1,171
Likes: 0
Received 0 Likes on 0 Posts
Default

Great! Thanks for the follow up.
Old 02-27-2009, 04:18 PM
  #48  
Couper
Intermediate
 
Couper's Avatar
 
Join Date: Jan 2009
Posts: 47
Likes: 0
Received 1 Like on 1 Post
Default

Can you elaborate a little on what happened? Did it just need to be recoded with newer software? Is it possible to pick specific speeds?

I designed a circuit that lets you adjust the extend and retract speeds. It works on the bench, I just haven't had time to install it yet.

Thanks,
Old 02-27-2009, 07:32 PM
  #49  
kas930
Rennlist Member
Thread Starter
 
kas930's Avatar
 
Join Date: Oct 2007
Location: Newburgh, Indiana
Posts: 94
Likes: 0
Received 1 Like on 1 Post
Default

I picked this car up at a local auction with a bad motor and restored it. Beside the engine issues, the LCD on the odometer was also all washed out. So part of my restoration of the car included putting in a new instrument cluster. I had an indy reprogram the cluster. It wasn't until I added the LED before I learned that the tail was functioning at different speeds (which is when I started this thread). I discussed the issue with my local Indy as well as this site and Renntech.org, but no one seemed to have seen this before. I let me Indy take a look at it and in the end what he wrote on the service ticket is what I know (he reprogrammed the spoiler), I'm assuming this had something to do with the cluster programming (since I wasn't charged anything, but not sure, didn't get a chance to talk with my Indy).
Old 10-27-2010, 01:41 PM
  #50  
COMBIJET
1st Gear
 
COMBIJET's Avatar
 
Join Date: Oct 2010
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default

2001 996 C2 DASH CLUSTER REMOVED, REPLACED COMPLETE BURN OUT OF CIRCUIT BOARD REPLACED CLUSTER WITH ANOTHER SAME AGAIN. DESPERATE
Old 10-28-2010, 11:36 AM
  #51  
LVDell
Nordschleife Master
 
LVDell's Avatar
 
Join Date: Oct 2003
Location: Tobacco Road, NC
Posts: 5,225
Likes: 0
Received 28 Likes on 23 Posts
Default

Holy WTF Batman!
Old 10-29-2010, 12:03 AM
  #52  
spender
Pro
 
spender's Avatar
 
Join Date: Aug 2010
Location: Calgary, Canada
Posts: 527
Received 0 Likes on 0 Posts
Default

I found the item on eBay again, took a bit of searching around, it is here:

LINK TO EBAY LISTING

If I get this right, this is just an indicator, not a switch, correct?
Old 10-29-2010, 01:46 PM
  #53  
AndyK
Addict
Rennlist Member

 
AndyK's Avatar
 
Join Date: Dec 2001
Location: Northern NJ
Posts: 6,942
Likes: 0
Received 5 Likes on 5 Posts
Default

Would be cool to link it to that warning light that comes on when you first start the car - the spoiler check light. Or, it might be too distracting to have a red light come on just when you get going on a track, etc.

As for spoilers that deploy at wrong speeds, I bet Porsche would fix that free, since the spoiler is a safety item, not just cool looking!



Quick Reply: Automatic spoiler extension question



All times are GMT -3. The time now is 02:11 AM.