Carbon Fiber Rear Deck Lid
11-04-2008, 05:26 AM
#1
Instructor
Thread Starter
Join Date: Oct 2008
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Carbon Fiber Rear Deck Lid
I originally posted this thread asking if anyone had a stock rear deck lid they wanted to get rid of. Well I decided to change it because I don't really need to keep one. I am make CF stuff and "NEED" to make a CF rear deck lid to work with my mounts for the rear spoiler that I also make. I have to use a stock lid to make a mold of it. Let me know if anyone wants to let go their lid for a week or so. I have to room to be very flexible.
Last edited by Gradus Futura; 11-05-2008 at 11:28 PM.
Trending Topics
11-05-2008, 09:10 AM
#8
IIRC The slope angle of the lower part of the deck is slighly different between the MK I and II but I'll let someone else clarify that. You can use them interchangably as I have seen that people use the MK I wings on MK II cars but there is some slight difference.
11-09-2008, 04:23 PM
#12
Burning Brakes
Hello
I'd like to know if you would be able to make some interior parts in carbon fiber with good quality.
They are very expensive as OEM Porsche and aftermarket too.
Pieces like upper center console, rear center console, and other trim pieces.
If you would, and the cost is affordablet here will be lot of us raedy to purchase these pieces.
I'd like to know if you would be able to make some interior parts in carbon fiber with good quality.
They are very expensive as OEM Porsche and aftermarket too.
Pieces like upper center console, rear center console, and other trim pieces.
If you would, and the cost is affordablet here will be lot of us raedy to purchase these pieces.
11-10-2008, 04:18 AM
#13
Instructor
Thread Starter
Join Date: Oct 2008
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Hello
I'd like to know if you would be able to make some interior parts in carbon fiber with good quality.
They are very expensive as OEM Porsche and aftermarket too.
Pieces like upper center console, rear center console, and other trim pieces.
If you would, and the cost is affordablet here will be lot of us raedy to purchase these pieces.
I'd like to know if you would be able to make some interior parts in carbon fiber with good quality.
They are very expensive as OEM Porsche and aftermarket too.
Pieces like upper center console, rear center console, and other trim pieces.
If you would, and the cost is affordablet here will be lot of us raedy to purchase these pieces.
If someone would like a carbon fiber deck lid and has a plain 911 deck lid, please PM.
