Jetpilot

I just purchased the OEM wing (cab style wing) for my 2004 C2 and have been told i need to balance it out with a spliter. This is good advice, but would like to know if someone makes an after market splitter that will fit on the stock 04 C2 bumper. Porsche does not make a splitter for the 04 C2 front bumper cover- which forces you to buy the aerokit 2 bumper or an after market of sorts.... I understand some drilling may have to be done, but if i do it right then great.


Chime in with the help - Thanks

CWay27

The cup car splitter fits the stock C2 bumper.

Jetpilot

Thanks - where can you get one?

Wellardmac

porsche dealer. Cost around $70.

Apex996

Have you got the part # handy on that splitter?

Wellardmac

Here you go!

996 505 986 00

ivangene

will this fit an aero bumper too? (think that is what I have)



PS pic prior to pumpkins and de-amber headlights... Boy I like it better now, need new pics

Wellardmac

yes, the splitter is designed for the aero bumper

Jetpilot

Wellerdmac- Thanks for your help thus far. Will this fit on the 04 C2 bumper cover, or does it have to be modified?

AND if anyone did have to modify - share your pics please.

Thanks

bk12

I think there is a special partial splitter that works with that cab wing. It goes underneath the car behind the bumper...do a search and you can possibly find some info on it. I think LVDell had some old posts on this.

CWay27

CUP splitters are not available at the the dealer, PMNA only or other vendors like TRG and they cost a little over 170$...... not 70$.

LVDell

Michael, got your email. I'll ping you in the afternoon tomorrow between classes.

Jetpilot

Thanks LVDell. I will send you my contact info via email - in case i didn't.

ivangene

talk about bursting my bubble

Staylo

a quick search of that part# on Pelican says $69
http://http://www.pelicanparts.com/c...FILTER_996M=ON