Notices
996 Forum 1999-2005
Sponsored by:

Minor Leak coming from these two ????

Thread Tools
 
Search this Thread
 
Old 04-20-2008, 04:53 PM
  #1  
Carrera Mike
Addict
Lifetime Rennlist
Member
Thread Starter
 
Carrera Mike's Avatar
 
Join Date: Jul 2003
Location: Right Coast
Posts: 3,773
Likes: 0
Received 15 Likes on 11 Posts
Question Minor Leak coming from these two ????

Ive had this very minor leak and narrowed it down to be coming from these units. Could anyone tell me please what they are? Are they Cam Position sensors?? They are located forward and aft of the # 4 spark plug on the left side of the engine and forward and aft of # 3 spark plug on the left side of the engine. Nearest to the variocam chain. Theres tota four of these bad boys. Only the two on the left side of my engine are leaking though.

These ones I have on the left side are both leaking oil through their O-rings. Somehow I can not find the part nos of these o-rings with my PET.

Thanks in advance.
Attached Images    

Last edited by Carrera Mike; 01-04-2009 at 01:38 PM.
Old 04-20-2008, 06:11 PM
  #2  
Orient Express
Three Wheelin'
 
Orient Express's Avatar
 
Join Date: Nov 2003
Location: SF bay area
Posts: 1,472
Received 39 Likes on 11 Posts
Default

If the short one is 996.605.901.00 it is a solenoid valve for the vario cam and is the short one. (illustration 103-10, item 10 in PET) I don't see a P/N for the O ring for that one, but try 900.123.147.30. If your local Porsche parts counter is any good, they should be able to find the right one.

The other one, I can make out a P/N of 996.105.303.02 It is called an actuator and is also part of the vario cam. The P/N for the O ring for that one is 996.105.903.05 (Illustration 103-11 item 41 in PET)

Last edited by Orient Express; 04-20-2008 at 06:56 PM.
Old 04-20-2008, 06:57 PM
  #3  
Carrera Mike
Addict
Lifetime Rennlist
Member
Thread Starter
 
Carrera Mike's Avatar
 
Join Date: Jul 2003
Location: Right Coast
Posts: 3,773
Likes: 0
Received 15 Likes on 11 Posts
Cool

Joel Riser helped me figure out the right PET illustration figure 103-11. (I was looking at wrong illustration 103-00 earlier)

They are # 40 and # 41, which are Variocam Actuators. The O-Rings I need are as follows:

-For #40 996.105.903.03

-For #41 996.105.903.05

Last edited by Carrera Mike; 04-20-2008 at 07:53 PM.
Old 04-20-2008, 07:00 PM
  #4  
rleeq
Racer
 
rleeq's Avatar
 
Join Date: Jun 2005
Posts: 378
Likes: 0
Received 0 Likes on 0 Posts
Default

I think your question was answered on PCA.org.
Old 04-20-2008, 07:53 PM
  #5  
Carrera Mike
Addict
Lifetime Rennlist
Member
Thread Starter
 
Carrera Mike's Avatar
 
Join Date: Jul 2003
Location: Right Coast
Posts: 3,773
Likes: 0
Received 15 Likes on 11 Posts
Cool

Originally Posted by rleeq
I think your question was answered on PCA.org.

Yup! Joel Riser actually helped me figure it out.



Quick Reply: Minor Leak coming from these two ????



All times are GMT -3. The time now is 12:45 PM.