PCM 2.0 Dead
#1
Instructor
Thread Starter
Join Date: Dec 2007
Location: Heimsheim, Germany
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
PCM 2.0 Dead
My PCM 2.0 Nav HU has been dead since I picked it up from the Port. Fuse is good - any thoughts. The car is CPO but I don't mind getting my hands dirty...
#2
Intermediate
Join Date: Jun 2007
Location: Mons , Belgium
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
#4
Instructor
Thread Starter
Join Date: Dec 2007
Location: Heimsheim, Germany
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
I did not realize it was so wasy to remove the PCM! I replaced the fuse and now the nav works but it is not registering the cd changer and the amp. Is there another fuse that I should be checking?
#7
Instructor
Thread Starter
Join Date: Dec 2007
Location: Heimsheim, Germany
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
I'd bring it in for service but I'm off on a three week trip. The sunroof also need to be worked on. I've only had the car a week and driving it is far more important!
Trending Topics
#8
Intermediate
Join Date: Jun 2007
Location: Mons , Belgium
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
If i remember well i have 2 fuses but i must be wrong cause it's been a long time since i removed the pcm .
Double check it to be sure .
Hope this helps
see ya all and have fun