Another Offset Question
Rennlist Member
Joined: May 2006
Posts: 1,945
Likes: 5
From: Northern Virginia
Those are 997TT wheels. Play with the offset calculator and use what it tells you to take some measurements. Looks like it is very very close but would be a very tight fit if it works. I am in no way saying that it will. The usual max on the rear 996 with a 10" wheel is ET48 (this is using the stock ET65 with a 17mm spacer as recommended by Porsche) or ET63 with an 11". This wheel is nearly 10-11 mm further out. Which makes it a grey area unless a test fit is done. Things that may make it work are additional negative camber in the rear and rolling the fender lip and lastly not using too big of a tire for the wheel so that you end up with the euro style of the tire being stretched on the rim (like a 295 or 305) as opposed to ballooning a bigger 315 on there.
Hope this helps ya out.
Here is the link to the offset calculator: offset calc
Hope this helps ya out.
Here is the link to the offset calculator: offset calc
