Notices
996 Forum 1999-2005
Sponsored by:

Cool Garage Door Opener Switch

Thread Tools
 
Search this Thread
 
Old 10-20-2006, 10:10 AM
  #46  
gota911
Newbies Hospitality Director
Lifetime Rennlist
Member
 
gota911's Avatar
 
Join Date: Apr 2005
Location: Winston-Salem, NC
Posts: 18,085
Likes: 0
Received 32 Likes on 32 Posts
Default

Originally Posted by fw2001c4
finally got around to doing the switch install. works well and looks beautiful.

for what its worth, when i connected the feed off the rheostat for the illumination, my connections were the opposite of gota911's instructions of running + to the open door icon(the flat side) and - to the close door icon(bumpy side). no biggie but i thought i mention it.

thanks all for the assist.
I'm glad you got that working. You were correct about the switch polarity. I had initially listed the wrong polarity of the switch. The positive (+) wire (Blue wire with Red hash marks) should connect to the "closed door" side of the switch (side with the bump) and the negative (-) wire (Brown) should connect to the "open door" (or flat) side of the switch. I have updated my earlier post (#39) to show the correct switch polarity.



Quick Reply: Cool Garage Door Opener Switch



All times are GMT -3. The time now is 04:11 AM.